I have a brand new just got it yesterday alphasonik pma4150a 4 channel amp. This amp is a beast its rated at 150 x 4 at 4 ohms and 240 x 4 at 2 ohms and 460 x 2 at 4 ohms mono. The amp is one of the sexest amps I have ever saw and the only reason im looking to sell it so soon is because its just to big I need a smaller footprint. The amp is 22 inches long 8 inches wide and 2 inches tall. The amp has a really nice crossover and it aslo comes with a voltmeter you mount up front to see the voltage of the amp really nice feature if you ask me. Here are the stock specs of the amp.
150 Watts x 4 @ 4 ohms Stereo
240 Watts x 4 @ 2 ohms Stereo
460 Watts x 2 @ 4 ohms Mono
Dimensions: (W x H x L) 8 1/4" x 2 5/8" x 22"
Hour Meter
Remote Mount Digital Voltmeter(included)
Heavy Duty One-piece Extruded Aluminum Heat Sink
Beveled Clear Acrylic Protective Cover
Tiffany-Style Input and Output RCA Jacks
Parallel Line-out RCA Jacks
MOSFET High Speed Switching Power Supply
Milspec Double-Sided Glass Epoxy Circuit Board with Through-hole Plating
Heavy 4 oz. Pure Copper PC Traces at All Preamp and Amplification Stages
Solid Brass Nickel-plated Terminal Blocks (4-gauge Power, 8-gauge Speaker)
THD: 0.05
Signal-to-Noise Ratio: >100dB
Frequency Response: 5Hz~50kHz
Input Impedance:10K ohms
Input Sensitivity: 200mV~8V
4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset
Thermal Cooling Fan
Like I said I just got it yesterday and installed it and its way to big there is no way ill be able to fit a battery and subs and anther amp in my trunk. I would really love to keep it I just need something smaller so Im only asking 150 shipped or trades for other 4 channel amps. I will have pictures up very soon.
I aslo have a dd M3 for 450 shipped and a kinetik hc2400 for 150 plus shipping
150 Watts x 4 @ 4 ohms Stereo
240 Watts x 4 @ 2 ohms Stereo
460 Watts x 2 @ 4 ohms Mono
Dimensions: (W x H x L) 8 1/4" x 2 5/8" x 22"
Hour Meter
Remote Mount Digital Voltmeter(included)
Heavy Duty One-piece Extruded Aluminum Heat Sink
Beveled Clear Acrylic Protective Cover
Tiffany-Style Input and Output RCA Jacks
Parallel Line-out RCA Jacks
MOSFET High Speed Switching Power Supply
Milspec Double-Sided Glass Epoxy Circuit Board with Through-hole Plating
Heavy 4 oz. Pure Copper PC Traces at All Preamp and Amplification Stages
Solid Brass Nickel-plated Terminal Blocks (4-gauge Power, 8-gauge Speaker)
THD: 0.05
Signal-to-Noise Ratio: >100dB
Frequency Response: 5Hz~50kHz
Input Impedance:10K ohms
Input Sensitivity: 200mV~8V
4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset
Thermal Cooling Fan
Like I said I just got it yesterday and installed it and its way to big there is no way ill be able to fit a battery and subs and anther amp in my trunk. I would really love to keep it I just need something smaller so Im only asking 150 shipped or trades for other 4 channel amps. I will have pictures up very soon.
I aslo have a dd M3 for 450 shipped and a kinetik hc2400 for 150 plus shipping
