aghhh about that time foe a rebuild..wall time..need ideas

[jaeguerra909 10+ year member]

So I'm done with 2 18's time to move on to 4 this will be my final build in this pos civic a tahoe or SUV of some kind will be next.any ways it will be in the back of a 97 civic coupe so room will be hard to work with as far as porting goes im sure lately been thinking clamshell but sealed or ported? I want this build this time to get stupid low but still be able to maintain a 150 at least ? So any ideas?

Click to read more...

 

[CAT MAN 5,000+ posts]

music 50? i would do the usual db drag design. subs on the left with the port on the drivers side.

however if you want to go a little less normal do a 2 common wall port 2 subs on each side. or a 1 common wall on top.

 

[jaeguerra909 10+ year member]

What I would really like to do is a sealed clamshell where the woofers are and ports on both driver and pass side I'm gonna have to ask my box guy first to see if IRS even possible with the limited space

 

[xShoWTeKx 10+ year member]

you got room to do a diamond? 1 18 on each side.

 

[jaeguerra909 10+ year member]

Idk? Lol like I said I'm gonna ask the guy that does my boxs he knows his stuff

 

[hispls 5,000+ posts]

4 18's in a civic? I have seen 4 15's and that was rather smaller than optimum space. Good luck with that. IMO you'd be better off with 6 12's

 

[Mitch86 5,000+ posts]

I really doubt you have the space for 4 18s. May squeeze 3 in there if you're lucky.

 

[jaeguerra909 10+ year member]

I thought 4 15's too but he said 18's will I'd I did 12's I'd have to buy all new **** we talked about doing part of the box in the trunk for more airspace

 

[Imtjnotu 5,000+ posts]

Friend is doing 52's in a mustang off 4 15's walled

 

[QuietEclipse29 10+ year member]

Friend is doing 52's in a mustang off 4 15's walled

Yea he knows johnny, and John should be louder but his rise from 0.75 to 5ohm is not good. And I've only seen a 151.9 outa that thing