Aero vs Vent?

Zerim
10+ year member

Member
Ok title really says it all, and i'm very sorry if this a repost which it most likely is. I did search and found nothing tho.

So what is the difference in sound here? i have heard that aero ports give you bad port noise. I've never had experience with them but was drawn to the fact that i could change tuning just by changing tube. I have had a box with a vent port tho at 34hz and could never make out "port" noise just sounded good to me. Some one with more experience please help me out here.

 
aero ports don't cause port noise, not enough port area causes port noise

unrounded pvc ports cause port noise

unrounded slot ports cause port noise

bigger the port area, lower the air velocity, less noticeable port noise

they're both fine, if you want to change your tuning, aeros are just fine

 
//content.invisioncic.com/y282845/emoticons/bowdown.gif.b85b23b82970bd22fb6b549c3392f016.gif Thank you!!

So to install a aero port, you just build your box the size you want, and then find the right aero port for your need, and cut it in? probably silicone the back for seal? That sounds to simple, what am i missing anything??

 
//content.invisioncic.com/y282845/emoticons/bowdown.gif.b85b23b82970bd22fb6b549c3392f016.gif Thank you!!
So to install a aero port, you just build your box the size you want, and then find the right aero port for your need, and cut it in? probably silicone the back for seal? That sounds to simple, what am i missing anything??
Just make sure you tune it right.

 
Can anyone explain how to properly install and use aero ports? It cant be hard just want to make sure i do things right.

 
The easy way to use aeros would be to make them external. That way you don't have to take the whole port out everytime you wanted to change tuning.

Like this:

aqbox3.jpg


Looks ugly, but changing the ports is easy and quick. Use duct tape to attach the ports.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Zerim

10+ year member
Member
Thread starter
Zerim
Joined
Location
Utah
Start date
Participants
Who Replied
Replies
8
Views
752
Last reply date
Last reply from
yacob.naif
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top