A good find ?

[audiobahnuser18 5,000+ posts]

Alright guy's well for fathers day i went to a car show with my dad , and well they had a swap meet. well i found this guy with some old skool car audio stuff and i came across this amp can anyone tell me some information on it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif im looking right now for info on it also but also the quality of this amp also if anyone has ever used it?. Thanks guys

Click to read more...

 

[audiobahnuser18 5,000+ posts]

Well guy's i did find some information on this amp here's what i came up with.

* 300 Watt Digital Amplifier

* Bridgeable

* 4, 3, or 2 Channel Power

* Preamp inputs

* Built in adjustable Xover 50-200Hz hp/lp

* THD at rated power 4ohm

* 0.04% -Mod dc-dc p/s with MOSFET Frequency

* Response - 10Hz to 50Khz +/- 1db

* No current limiting

* S/N ratio - 100dBA

* Input mode selector (MONO/ST/L+R)

* Input Sensitivity - 200mv to 4.0V

* Gold Plated RCA input/output and screws

* Thermal Overload Protection

 

[dipitydoo 10+ year member]

30x4@4 ohm, 40x4@2ohm, 80x2@4ohm mono.

 

[dipitydoo 10+ year member]

I had one, decent amp back then, maybe 10+ years ago, but not much power for today's standards.

 

[Prowler573 5,000+ posts]

80w X 2 @ 4 Ohm mono bridged would be adequate power for more than a few of the popular component sets in use nowadays...

 

[02parkave 5,000+ posts]

old alpine stuff is usually decent!

 

[pickup1 5,000+ posts]

how much was it?

 

[phantom240 5,000+ posts]

Wanna sell it? I used to have one like it. I want another. LOL.

 

[audiobahnuser18 5,000+ posts]

Phantom i pmed you . and everyone else thx for the info.

 

[jdawg 5,000+ posts]

Those were great quality amps. I can tell you though if you even try to turn it on at 2ohms mono itll pop fuses, they donr like that, but other than that they are pretty solid.

 

[audiobahnuser18 5,000+ posts]

oh alright thanks man . im not sure if i will be using now or not cause i might just sell my 6.5 alpine type s door speakers and save up for a nice component set. but im not quite sure so i might be open to trades with this amp.

 

[jdawg 5,000+ posts]

back then the technology just wasnt there to run low impedances unless you had like $800 to blow on an amp. Wattage is pretty cheap nowadays. But that amp bridged to your componets would do nice.

 

[audiobahnuser18 5,000+ posts]

how would i wire it to em really?

 

[CaliforniabOY5 10+ year member]

A good find will depend on how much you PAID for it. . . . .?