75 Buck Truck Build Log.

Prepping for the small local show at USF campus tomorrow. Should be fun , and LOUD!! Here's some pics of what i'm bringing to the show.

THE CRAPTACULAR 75 BUCK TRUCK!!

e89fe250.jpg


dea42d4f.jpg


The OMG Horn (This Sucker Is LOUD!!!!!!) It's a EV Midrange Compression Driver With A 2" Voice Coil , On A Jensen Horn Thats Roughly Over 1 foot tall and 2 Feet Wide. It's AWESOME!!

940efb04.jpg


c9aed23d.jpg


d2582b7f.jpg


532170e8.jpg


4d6f5c2b.jpg


f474c994.jpg


e53e5a30.jpg


e56b77d5.jpg


Yes , i know i shouldnt be using that battery. But it is strapped down now , my windows stay down , and if it leaks...........WHO CARES?? Its a 75 dollar truck!!!

 
How'd it do at the show ?
it shocked everyone who sat in it , and i got a little cocky with it and slinkyed the coil on the 12. But no worries , i have some really cool things about to go in this sucker.
BUILD LOG UPDATE!!!

Well the MOFO 12 is in its final resting place. It was a pretty decent sub considering its manufacturer and original price. Now i'm temporarily using an adaptor plate and a 10" driver from a Klipsch Powered Home Theater Sub that a friend of phatboi's found roadside. And this sub will be seen in the future , thats a guarantee. It's only a 10" driver that was originally powered by 200 watts. I'm sending considerably more power to it and it takes it like a champ. It moves some serious air for such a small (2" or 2.5" coil , motor is the size of a Kicker CVR motor) sub. But it digs deep and because of the design the coil will not bottom out. Best part is how musical it is compared to the MOFO. It deserves to be in a budget SQ build , very nice driver.

FRONT STAGE UPDATE!!

I'm about to ditch the current front stage and install 2 RE audio 6.5's , 2 Selenium 6.5's , and a single DB drive P5TW In each door. And gonna try my hand at glassing 2 RE Audio Dome Tweeters in each A-Pillar. Will eventually get my hands on another AP2004 , but until then i think i'll power all RE's on the front using the RE passive crossovers , and the seleniums and DB drives on the Rear channels of my current AP2004.

SUB STAGE UPDATE!!!

Well today i just got my hands on a MMATS Procast 10 that needs a surround. So because of my VERY limited budget i'm gonna buy a surround for it and run it temporarily.

But when i have a little more funds i'm gonna make use of the 15" basket i also got tonight and buy some nice softparts and use the MMATS Procast motor to build a stout 15 that should easily take 1500+ daily. And after that is completely installed and finished i think i will end the install phase and focus on the enjoyment phase of this build. Heres a few pics of the horns , the klipsch SQ surprise , the MMATS procast , and i relocated my amps to a safer (but terrible place for adjustment) spot in the truck. Also in the works is a nice AGM batt from posey's or square deal , and the entire electrical system will be replaced with 1/0.

2868700a.jpg


64b69dfc.jpg


ec1a45af.jpg


151a4bdd.jpg


5db6c3dd.jpg


 
BTW , i'm still under $150 invested total , but after i build this 15 , replace the radiator , and put new tires on it i'll probably have around 500 total invested. Make that 600 , gonna possibly do a blowthrough , so i can regain the use of the rear seats.

 
what is up with the confederate flag
During the solicitation for the second national flag, there were many different types of designs that were proposed, nearly all making use of the battle flag, which by 1863 had become well-known and popular. The new design was specified by the Confederate Congress to be a white field "with the union (now used as the battle flag) to be a square of two-thirds the width of the flag, having the ground red; thereupon a broad saltier of blue, bordered with white, and emblazoned with mullets or five-pointed stars, corresponding in number to that of the Confederate States.

But in this situation it was pure irony. Someone on facebook said anybody who drives a truck that ugly must be a hillbilly redneck , so i duct taped the entire enclosure and bolted a rebel flag on it. When the blowthrough is done i'll leave the duct tape and dixie out of the build.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Thread starter
Bassin Buick
Joined
Location
Brandon , FL
Start date
Participants
Who Replied
Replies
40
Views
5,778
Last reply date
Last reply from
Bassin Buick
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top