4 guage split to 4/8 guage

[Motovet 10+ year member]

I have one of the new distros that can accept 4 guage in, and 4-8 guage out. I plan on running my new Zed Duece(4 guage) and a cheapie two channel for the rears(8guage) off the distro, with 4 quage in. That ok?

Click to read more...

 

[XaznKewLguyX 10+ year member]

I have one of the new distros that can accept 4 guage in, and 4-8 guage out. I plan on running my new Zed Duece(4 guage) and a cheapie two channel for the rears(8guage) off the distro, with 4 quage in. That ok?

I'm doing the same thing except mine is 0awg in and 2 4awg out. But instead i put 0awg in and 1 4awg and 1 8awg out. Should be find just remember to use the right size fuse. I have a 200a and a 100a

 

[spin dB 10+ year member]

Ideally you would want to have 2awg going in with 4 8awg coming out but as long as you don't try to connect anything else to it it should be fine

 

[bbka 10+ year member]

Ideally you would want to have 2awg going in with 4 8awg coming out but as long as you don't try to connect anything else to it it should be fine

What about a 3-way dist block and going (1) 4awg wire in (2) 4awg wires going out? I will have a bunch of 4awg wire leftover, so I figured I would just use that instead of buying 8awg to run to my amps. The dist block can accept 1/0 or 4 gauge in and 4 or 8 gauge out.

 

[Motovet 10+ year member]

Thanks.

 

[chartman18 10+ year member]

Where can I get a good 0/1 guage distribution that splits into 2x 4 guage wires? I looked everywhere, and they are all not the kinda Im looking for.

Thanks.

 

[bbka 10+ year member]

Where can I get a good 0/1 guage distribution that splits into 2x 4 guage wires? I looked everywhere, and they are all not the kinda Im looking for.
Thanks.

http://www.knukonceptz.com

I just bought this one... http://www.knukonceptz.com/productDetail.cfm?prodID=KNF-12