4 channel amps

[rocky 59 5,000+ posts]

okay im moving form 2 2 channels to one 4 channel. now the front amp is going to run the dash speakers and the back is going to run the mids. my question is can i set the amp like this front- 50x2@4 ohms back- 2- 110x2@2 ohm??? this is the amp- http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=224 or if this doesnt work what will??

Click to read more...

 

[rocky 59 5,000+ posts]

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=3190

this is another choice of mine

 

[rocky 59 5,000+ posts]

can anybody help me with this???

 

[dak0ta_g33k 10+ year member]

looks like good choices.

i'm using a mxa6004 to run RE components (75w) and 6.5 xxx's at 150 w. not bad for a b-stock item off of ebay for under $200.

i think the hardest part is finding the space for mounting 4 channel amps, they tend to have big footprints.

 

[rocky 59 5,000+ posts]

but could i wire it that way to have two ohm levels and gains settings??/

 

[dak0ta_g33k 10+ year member]

looks like good choices.
i'm using a mxa6004 to run RE components (75w @ 4ohms) and 6.5 xxx's (150w @ 2ohms). not bad for a b-stock item off of ebay for under $200.

i think the hardest part is finding the space for mounting 4 channel amps, they tend to have big footprints.

whoops, slight edit, i don't see why not. i have different gains set for the RE comps and 6.5 xxxs. two channel input to the mxa amp