4.2ft 36hz Three 10 R's 2400RMS - 47in^2 Flared Port box build

[amartin_72]

Budget active, low and loud build

2 1200d's strapped, extra 140 amp alt, 3 dual 2 r's = $580 shipped new/mint on ebay

One 47in flared port from audible engineering $45 shipped

2 selenium d-250x horn drivers, 4 6.5 goldwood woofers = $110

2 Lightning b4.250.2's 100rmsx1@8 ohms each = $75 shipped ebay used

1 RF Punch 401s 200x2@ 2 ohms for the 6.5's - $75 had it

Extra 140 amp alt/battery/ bracket wiring - $200

$1100 2400sub/600 front

I will have to re organize the baffle and add a few layers to clear the port. 1.25" walls 3.75" Face.

Finishing it up tomorrow.

Click to read more...

 

[jdawg 5,000+ posts]

sure your woofers will clear the port?

 

[m3dia_lab 10+ year member]

it does look close...

 

[EuphoricBass247 10+ year member]

Was wondering the same.may have to double baffle to raise em up alittle.should be a nice build

 

[thegreatestpenn 5,000+ posts]

8in aero? nice

 

[amartin_72]

Yeah I plan on cutting a large triangle out of that single baffle, and adding at least two more before the flush mount baffle. I might just have to move the port an inch or so too. **** it.

 

[WOT]

That might even be a 10" aero?? Whered ya get it?

Im debating rebuilding, and DIY aeros arent looking to pleasant

 

[WOT]

I wouldnt move the port, just lift the subs

 

[WOT]

ps- be more gentle when flipping your box around@!!! that wood looks BEAT

 

[amartin_72]

Its an audible engineering 47in^2 flared port, 8" dia. Hoping to start with at least 146 from this setup.

 

[da box king 10+ year member]

Its an audible engineering 47in^2 flared port, 8" dia. Hoping to start with at least 146 from this setup.

link?

 

[amartin_72]

http://cgi.ebay.com/8-Flared-Ports-Each-end_W0QQitemZ110414726286QQcmdZViewItemQQptZSpeakers_Subwoofers?hash=item19b53b048e&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1205|293%3A1|294%3A50

 

[Engine_hp 10+ year member]

looking good

 

[EuphoricBass247 10+ year member]

hmm nice link.

 

[da box king 10+ year member]

so you make those ports?

does 8" sona tube work with the flares or what?