4 10's in standard cab

[mx519 10+ year member]

I'm looking for something to shake the ground. Would 4 10's do the job, and would they fit?

Click to read more...

 

[mx519 10+ year member]

This is in a standard cab Z71 99.

 

[Alpine CDA-9815 10+ year member]

I've had 3 10" subs in a standard cab truck for awhile. Four would be a tough fit, but I think it is possible.

 

[pcnbaseball44 10+ year member]

Im about to put 2 DD 3510's with the Lanzar Opti2000D in my 03 f-150 reg. cab. I think that will be more than enough. If you get good subs two is more than enough easily. I mean if your looking to compete with it or something then you've got the wrong car.

 

[Alpineinstaller 10+ year member]

do a five sided box. It will fit better than a regular box

 

[soundstreamer 10+ year member]

do a five sided box. It will fit better than a regular box

a box will need six sides to seal properly:

i've been able to port 3x 10"s behind the seat before. 4x 10"s would have easily fit in a sealed box.

 

[smgreen20 10+ year member]

The sixth side will come from the back wall of the cab, carpet removed of course. You could even do a 4 sided box where the back and bottom of the box are of the cabs floor and back wall.

 

[Bake 10+ year member]

Using the back wall is easy. I think you would have to use at least some glass on the floor because of the shape of the floor.

 

[smgreen20 10+ year member]

Use cardboard to "sculpt" the shape then trace it to the wood. Cut, then silicone the crap out of it.

 

[Justinw303 10+ year member]

The sixth side will come from the back wall of the cab, carpet removed of course. You could even do a 4 sided box where the back and bottom of the box are of the cabs floor and back wall.

Great way to vibrate the shit out of it.

 

[cheeseburger35 10+ year member]

i've had 4 10's in a 79 chevy pickup.. i know it's possible for 4 10's in a newer truck..

 

[pcnbaseball44 10+ year member]

hey cheeseburger, how do you like your DD? I cant wait till monday till i get my 2 10" 3500's in! I hope they pound in a little reg cab.

 

[smgreen20 10+ year member]

Great way to vibrate the shit out of it.

After the box is made and perm installed, line the inside w/something in the lines of rhino liner (bed liner). That will keep it from ratteling and flexing.

 

[imaspaceguy90 10+ year member]

4 should fit in there pretty tight but if udo ge tthem in there with enough room it will rattle more than the ground

 

[VOA_NIGHTMARE 10+ year member]

my cousin had a 84 z71 reg cab and had 4 10's in it sealed with no problem but the seat was up forwards a bit but he is a shorter guy. And it sounded great,really loud and clear this was also 8 yrs ago and he was running some hifonics then :0)