350z

[jmanpc 5,000+ posts]

Slim jim ftw. I had to jimmy my exploder open so many times.

 

[Johnny Drama 5,000+ posts]

I can get my keys copied at any hardware store //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Me too //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Its great isnt it.

 

[amoffitt 10+ year member]

hmm i wish a slim jim would work

 

[hoss 5,000+ posts]

**** cars...... ahh anything i can do around the trunk area.

not to my knowledge... with the electric release on the trunk lid you would probably end up damaging something trying to jimmy it. not only that, but that wouldnt get you anywhere, you would need a very small, very flexible asian to go through the hatch, around the strut bar, and into the passenger area lol.

try a locksmith, they might be able to get in there. at the very least they could pry the glass back from the sill and poke the lock button with a stick.

 

[amoffitt 10+ year member]

not to my knowledge... with the electric release on the trunk lid you would probably end up damaging something trying to jimmy it. not only that, but that wouldnt get you anywhere, you would need a very small, very flexible asian to go through the hatch, around the strut bar, and into the passenger area lol.
try a locksmith, they might be able to get in there. at the very least they could pry the glass back from the sill and poke the lock button with a stick.

hmm might try pulling the glass back and poking it.

 

[Johnny Drama 5,000+ posts]

Get you a wedge and pry the window back enough to slide a coat hanger and press the unlock button...

 

[amoffitt 10+ year member]

hmm

 

[Ferendon 10+ year member]

If it's still under b2b warranty or certified pre-owned, then you have lockout service. 1-800-NISSAN-1. They'll send someone out to do it pretty quickly. You also have 24-hour road side assistance.

 

[amoffitt 10+ year member]

hmmm ill just leave it sitting there until i get bored and have extra time to get into it probably like 3 weeks

 

[paradoxbox]

either get a locksmith to do it, or just learn how to pick locks. seriously, lock picking is not very hard, i learned how to do it in a few days of practice and it's helped me out a number of times to get into my house.

 

[hoss 5,000+ posts]

either get a locksmith to do it, or just learn how to pick locks. seriously, lock picking is not very hard, i learned how to do it in a few days of practice and it's helped me out a number of times to get into my house.

if you can learn how to pick locks within a few days, why is it still too dificult to remember to take your keys with you when you leave?

 

[Silver 10+ year member]

Take a plastic wedge and jam it between the door and the body. Get a flexible rod (insulated with a rubber/plastic and poke at the lock. Or make a 90 deg bend in it and trip the lock.

Had to do it millions of times. Easiest way on cars imo.

 

[hoss 5,000+ posts]

guys, i highly doubt his keys have been in the car for a week now...

also, there are alot of replies from people who dont take into account the anatomy of a 350Z

 

[WildcatNate 10+ year member]

Well, I would not try to pry through the window on a 350. They have a motor that controls window height to create a firm seal when the door shuts. It is a system that is expensive to replace. I used to sell them and I had a customer **** his up and he was pissed.

Just call Nissan's roadside service if you bought it new.

 

[Ferendon 10+ year member]

Seeing as how they have not window frame to speak of, I'd say wedge back the window, and use something to hit the unlock button. But I'm drunk, what do I know?