200w to ID10 v3

[bunta 10+ year member]

I will be powering an Image Dynamics ID10d2 v3 with 200w (bridged) from an Alpine PDX 4.100. The birthsheet of the PDX as some say is is around 115w per channel. But, regardless, lets just say i am giving it 200w in a sealed enclosure...

Is it good enough?

Click to read more...

 

[negativezeroz 5,000+ posts]

200W is good. You don't have to bridge the amp. You can just run one channel to each VC. you should get another ID10.v3 and use that amp to it's purpose.

Be careful with the gain though. Don't go cranking it.