2002 Nissan Xterra install help (Hertz spkrs, Kenwood deck, alpine amp and JL sub)

[Golferbill78]

Recently I had to get rid of my wrangler and pulled out my stereo. I am now trying to install it into a recently purchased 2002 Xterra. My first issue is the wiring at the back of the stereo. When I purchased the truck the stereo didn't work, I didn't care as I knew I was going to install the one I had no matter what.

First issue, when I pulled the deck there wasn't a wiring harness. I am dealing with bare wires. I have eliminated the eight wires for the speakers and have 4 remaining. Hoping someone here can help me out.

The deck I am using is a Kenwood DDX491HD. The wires at the nissan that I have available are

Green/Red

Blue/Red

Red/Yellow

Pink/Black

What are the corresponding wire colors for the back of the Kenwood deck?

I have already ran the ground from the Kenwood. Are one of the wires above also a ground?

I have more questions but this is a good start. I also have some pictures that I am hoping to post in the following post. Thanks in advance for your help.

Click to read more...

 

[Golferbill78]

I am currently figuring out a host for my pictures so I can upload. The above questions are fairly straight forward. For someone on here this will be second nature, I am hoping..

Thanks again,

Bill