2002 Explorer

[ThatChevyGuy 5,000+ posts]

fire the subs back, or go ported subs up port back.

 

[HCCA 10+ year member]

fire the subs back, or go ported subs up port back.

Because....????

 

[loudmofo 5,000+ posts]

Because....????

it gets louder but this looks to be more sq nice job on install

 

[Beerdrnkr 5,000+ posts]

That's a really nice system you have there. Are you going to scrap the Boston xovers and use the one's from the Pioneer? Are you leaving the Bostons coaxially mounted? Edit: I see you just answered one of my questions.

 

[HCCA 10+ year member]

That's a really nice system you have there. Are you going to scrap the Boston xovers and use the one's from the Pioneer? Are you leaving the Bostons coaxially mounted?

No, scrapping the Boston x-overs won't be possible with the current configuration. I have three amps. Two of them feed the subs, so that leaves one amp to feed the mid/highs.

The speakers are coaxially configured, but I am going to cut down a spacer that I was working on. http://img200.imageshack.us/img200/8840/image074ns.jpg[/img]"]

It was too large in diameter. I will have to cut it down to the same diameter as the speakers themselves. That way I can angle the speakers (more for the reason of angling the tweeter, than anything else), and hopefully improve the staging, and imaging.

 

[HCCA 10+ year member]

I just thought to load a pic of the vehicle. Should have done that at the start!

http://img35.imageshack.us/img35/7572/ebexplorer.jpg[/img]"]

Aaannd...a little underhood SS DP. Forgot this one too.

http://img27.imageshack.us/img27/3981/image022ii.jpg[/img]"]

 

[Millertime1028 10+ year member]

Install looks great.

 

[Savag3 10+ year member]

looks nice , probly sounds great

 

[KINGDELL91 10+ year member]

great work looks beautiful

 

[HCCA 10+ year member]

Thanks, for the positive coments. It does sound great. I'm still tweaking, but I'm pretty happy with it. I'll post up after I get a few modifications done.

 

[bhsdriller 10+ year member]

looks nice and clean, good job dude

 

[DB-Audio 10+ year member]

looks great man

 

[HCCA 10+ year member]

fire the subs back, or go ported subs up port back.

I'm going to do a ported box...just for shit's & giggles. I'll have both to play with, but it isn't hard to switch back & forth. Hell, why not. I'll just do both to see how they perform, with the same subs, in the same vehicle.

 

[kkreit01 10+ year member]

Great job, and great idea drilling out the factory grill. I think I'll do that next time I have my door panel off (drive 2 Fords).

 

[Skip01 5,000+ posts]

Looks amazing dude.....i shoulda have done allll this before i started my setup.

Question, did you make that hole too run 1/0 through hood or it was there?