2 zcons

[frogcase2002 10+ year member]

hey i got 2 12" ssa zcons and 2 jl 1000/1s and was wondering the best way to wire them all up? i want the most power, let me no if you have any questions

Click to read more...

 

[The_Grimy_One 10+ year member]

What voice coil config are they?

 

[frogcase2002 10+ year member]

What voice coil config are they?

dual 2

 

[The_Grimy_One 10+ year member]

Wire each one to 4 ohms. The amp gives off the same power between 1.5 and 4 ohms. I wouldnt recommend running them @ 1 ohm, would be much harder on the amp.

 

[The_Grimy_One 10+ year member]

Like this...

 

[IonRL205 10+ year member]

You bought like $2500 worth of car audio equipment, and you don't even know what to do with it?

 

[frogcase2002 10+ year member]

Like this...

thanks man, do you think i would need any extra batts. with that setup, i have a high output alt.

 

[The_Grimy_One 10+ year member]

thanks man, do you think i would need any extra batts. with that setup, i have a high output alt.

I would at least have a good batt up front, and make sure your Big 3 is done. The Slash series isnt the most efficient amps by any means.

 

[frogcase2002 10+ year member]

You bought like $2500 worth of car audio equipment, and you don't even know what to do with it?

no just 250 each amp and 550 for both subs, and i was seeing op. that people had, cause i did have wired at 1 ohm

 

[frogcase2002 10+ year member]

I would at least have a good batt up front, and make sure your Big 3 is done. The Slash series isnt the most efficient amps by any means.

i have the big 3 in 4 ga. wire, you think i shoue upgrade?

 

[IonRL205 10+ year member]

i have the big 3 in 4 ga. wire, you think i shoue upgrade?

Yeah you should upgrade to 0 gauge.