2 ppi pro104s and 3 jl audio w0 10" 1sinlge cab 03 dodge ram

[jlm2002 10+ year member]

these are what i have. any ideas on amp selection? preferably less than $500. and should i go with just the pro104s or the jl w0s? (maybe both)

Click to read more...

 

[jlm2002 10+ year member]

come on guys.. i need some help here.

 

[etznova 10+ year member]

yeah you need to decide between the PPI's and the JL's. Not both

 

[jlm2002 10+ year member]

ok. im going with the ppi pro104s. im looking at either a mb quasrt dsc 1500.1d or hifinics brutus bxi 1610d. any suggestions

 

[CRXBMPN 5,000+ posts]

link me up to those ppi pro's, and what are you going to pay for them? The JL W0's are bottom of the line subs, I am pretty sure the Pro's are way better... plus are they the flat piston ones?

 

[jlm2002 10+ year member]

i got them for 119 a piece.

Features:

•E-Glass Flat panel

•Tri Radius symmetrical edge surround

•Dual gap motor

•Single flat interlaced Conex Spider with loop stitched tinsel leads

•3” High temperature Copper voice coil wound on an Aluminum voice coil former

•Custom Cast Aluminum frame

•Rubber wrap around two way mounting gasket

•Custom terminals

•Dual voice coil

•TriCool™ - Voice coil cooling system

•Custom impedance jumper system

Specifications:

Model Number PRO 104 PRO 124

MSRP $499.99 $549.99

Thiele/Small Parameters

Fs (free-air resonance, Hz) 32 39

Vas / Liter / ft3 17.8 / 0.63 21.5 / 0.76

Qts (total driver Q) 0.65 0.92

Re (DC resistance, ohms) 5.9 5.9

IMPEDANCE dual 4 Ohm dual 4 Ohm

Efficiency (1W @ 1M, dB) 81 dB (1W/1M) 83 dB (1W/1M)

Xmax (one way linear excursion, mm.) 24 26

Model Number PRO 104 PRO 124

Driver Physical Dimension

SIZE 10" 12"

Mounting depth (inches *) 7 - 1/2" 8 - 1/2"

Enclosure Details

1. External dimensions calculated for 3/4" building material

2. Includes port and speaker displacement

3. Volumes given are net tuning volume

 

[jlm2002 10+ year member]

and yes they are the flat piston

 

[jlm2002 10+ year member]

they are also 1000w rms and 2000w peak

 

[Bumpin' Goalie 10+ year member]

AQ2200d would work nicely. Or a Hifonics 2010. Make sure you have the electrical before you toss in ~2000w otherwise you'll most likely end up spending over your 500 beefing it up.

 

[jlm2002 10+ year member]

what add on to factory electrical would be needed?

 

[Chrispy 10+ year member]

Start out with the Big 3 and go from there.