I'm planning on putting 2 IDQ10 V.3's in a ported box. This is going into an Acura Tsx. I went to subwoofertools.com and made a box and just wanted to know what you guys thought about it before I go ahead with the build.
This is what I got
Net Volume: 3.12 cubic feet
Tuning Frequency: 27.5 Hz
Port Width: 3 inches
Port Area: 39 Square Inches
Port Length: 39.25 inches
External Dimensions: 30 wide x 14.5 tall x 21.75 deep.
Board Dimensions and Quantity
Color Count Width Height
Top and Bottom 2 30 inches 21.75 inches
Red 1 26.25 inches 13 inches
Yellow 1 21 inches 13 inches
Black 1 28.5 inches 13 inches
Green 1 21.75 inches 13 inches
Teal 1 17.25 inches 13 inches
Violet 1 17.5 inches 13 inches
Number of 49x97 Sheets of 3/4" MDF: 0.625
The width and height I'm ok with, but the depth leaves me with not that much trunk space or room to get to my spare tire.
Let me know what you guys think.
Thanks
