2 ID10d2 V.3's or 2 Dayton H0 10's in .95ft^3 sealed + 1000watts

[madmaxz 10+ year member]

ok so with this box on the way

http://musicmooseaudio.com/cgi-bin/i...504s57slim.jpg

The specs are:

Seperate Sealed .963 Cu. Ft. Per Chamber

Mounting Depth: 5-1/2" Inches

1999 - 2008 Ford F-250 & F-350 Crew Cab

Fits Behind Rear Seat (Forward Fire)

15 degree Face Angle

The amp i will be using is a rockford t5002 that puts out 1029watts at 2ohm briged

speaker im looking at with 5.5" or less mount depth are

2 Dayton Reference HO 4ohm SVC @ $125ea http://www.parts-express.com/pe/showdetl.cfm?Partnumber=295-462

2 ID10v3 d2's dvc - $160ea http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=4992

How would these compare in SQ and output with 1000w 450-500ea that enclosure.

BTW

I Would LOVE to include the soundsplinter RL-i 10s ive always wanted but at 200ea +shipping there alittle too much.

Looking for SQ and somewhat loud SQL?. My last setup was 2 pioneer 10" shallows so as long as their louder then those its all good. SQ will be 100x's better anyway for sure.

im also throwing Alpine type-s's into the mix because there so cheap at $60ea shipped new.

thanks

Click to read more...

 

[madmaxz 10+ year member]

Holy crap i just found 2 12's that would work with 5.5" clearance and so far ive only ready good things about them. anyone know anything more?

MBQuart 12" RWE304

* Peak Power Handling: 1000 watts

* RMS Power Handling: 500 watts

* Frequency Response: 18 - 300 Hz

* Subwoofer Size: 12"

* Impedance: dual 2 ohms

* Top Mount Depth: 5.43"

* Dual Voice Coils

* Surround Material: Rubber

* Sensitivity: 2,0 dB

* Crossover Slope: - dB/octave

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=3415

 

[madmaxz 10+ year member]

made up my mind (almost) 2 IDQ10v3's or 2 idq12v3s in .963ft3 and 1000 watts?