2 DP21"s

[GMCJimmyslt2000 10+ year member]

glue keeps the box together, not screws

 

[Mr. Slate 10+ year member]

glue keeps the box together, not screws

Please read my post again. Glue might keep your box together, you only have 1100 watts.

 

[snfsh79077 10+ year member]

Please read my post again. Glue might keep your box together, you only have 1100 watts.

um so taking into account that the bond of glue is stronger than the wood itself you must have not used enough glue in your application and your box fell apart. Simple as that. If done correctly the glue WILL be stronger than the screws or staples. Screws and staples are mainly used to hold the box together until it is fully cured.

 

[rmzsuzuki89 10+ year member]

The reson I preach about screws is because I ran 2 18s in my Explorer powered off of 1 JBL Crown. One day I was fooling around on the meter and my score had gone down alittle over a DB.To make a long story short, I found that my baffle had pulled apart from the box at the bottom (approx. 1/2 inch) and it was screwed and glued.

I guess if you have enough power, these things can happen.

Ya I've had that thought before, never happened though. I think it should be pretty secure though. It's going to be glued, screwed with some serious screws, and fiberglassed.

 

[rmzsuzuki89 10+ year member]

um so taking into account that the bond of glue is stronger than the wood itself you must have not used enough glue in your application and your box fell apart. Simple as that. If done correctly the glue WILL be stronger than the screws or staples. Screws and staples are mainly used to hold the box together until it is fully cured.

This is what I mainly like screws for, pull down and hold while everything sets.

 

[rmzsuzuki89 10+ year member]

Getting closer.

Just a fitting, and I wanded to get a look myself haha.

Inside.

I didn't get to the bracing like I wanted to, but there's tomorrow for that.

 

[Towncar 10+ year member]

Looks good, but you are taking youre sweet time on that box arent ya.//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[rmzsuzuki89 10+ year member]

**** school gets in the way haha.

 

[Mr. Slate 10+ year member]

um so taking into account that the bond of glue is stronger than the wood itself you must have not used enough glue in your application and your box fell apart. Simple as that. If done correctly the glue WILL be stronger than the screws or staples. Screws and staples are mainly used to hold the box together until it is fully cured.

Another thousand watter telling me about building.

I've built 5 different SPL vehicles (all mine) in the last 6 years. I've also held a National Title but I don't know what I'm talking about.

 

[Mr. Slate 10+ year member]

Rmzsuzuki89, it looks good, best of luck.

 

[I Like Waffle]

Those mother****ers are big. //content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif:wow://content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif:wow: How much can i get one for?

 

[Phlipbak 10+ year member]

$932049284092840978

....+tax

 

[rmzsuzuki89 10+ year member]

Rmzsuzuki89, it looks good, best of luck.

Thanks man.

 

[rmzsuzuki89 10+ year member]

Those mother****ers are big. //content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif:wow://content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif:wow: How much can i get one for?

They retail for $799, but they were on sale last month on SSA. I would check there since they are still on sale, just not as much off as last month.

 

[FloridaStanza 10+ year member]

Hey man i don't live to far from you, think i could hear this when it's done?