2 12's vs. 1 15

[gsuchyta 10+ year member]

I have 4 cubes to work with after port and sub displacement soo....

2 12's in 4 cubes off an atomic 3000

1 15 in 4 cubes off an atomic 3000

Each box would have 1 6" aero port. don't know if that's enough for 2 12's though

The only reason I can see why the 15 would be louder is because it is getting 4 cubes to itself whereas 2 cubes per 12 is a little on the small side. What are yalls thoughts?

The 15 would be somethin like a btl or mt or atomic apx the 12's would be something like AQ sd2.5s or RE SE's Open to any suggestions, but that is the max I can fit in my trunk

Click to read more...

 

[ultimate157 5,000+ posts]

12's

 

[gsuchyta 10+ year member]

BTW lookin to get as loud as possible could care less about SQ. although the box will be tuned to like 34-35 hz

 

[KHARPS 10+ year member]

(2) Sundown Nightshade 12's

(2) IA DP 12's

(2) Fi BL 12's

 

[gsuchyta 10+ year member]

thanks KHARPS. I was lookin at the BL 12's too

 

[dman4486 5,000+ posts]

BTW lookin to get as loud as possible could care less about SQ. although the box will be tuned to like 34-35 hz

then more cone area.....go w/ the 12s

 

[ultimate157 5,000+ posts]

then more cone area.....go w/ the 12s

not to mention twice the motor and twice the cooling.

 

[KHARPS 10+ year member]

BLs have the potential to get very loud.

 

[gsuchyta 10+ year member]

Is 1 6" aero flared port enough for 2 12's because if not I'm going to have to go with the 15?

 

[dman4486 5,000+ posts]

Is 1 6" aero flared port enough for 2 12's because if not I'm going to have to go with the 15?

depends on how much box you are going to have

 

[gsuchyta 10+ year member]

If I went with 2 12" BL's then the box would be 4.1 cubes total with a 6" aero 12.69" long for a tuning of 34 hz

 

[dumpin907 10+ year member]

i have an atomic apx 15