151.6@36hz

[Notloud00 10+ year member]

its dropping to 12.5-12.9 atm. not nearly as bad as some competitors ive seen. he is getting some money soon and we are completely redoing the box with aeros and bracing and tuning it to peak around 38. we are adding two bats and we are gonna talk to iraggi about an alt and its going to have a doubled up big 3 and 2 powers and two grounds. we hope to pull a 155 out of it with all of that and some deadning and we are possibly buying a termlab to help test.

 

[tommyk90 5,000+ posts]

its dropping to 12.5-12.9 atm. not nearly as bad as some competitors ive seen. he is getting some money soon and we are completely redoing the box with aeros and bracing and tuning it to peak around 38. we are adding two bats and we are gonna talk to iraggi about an alt and its going to have a doubled up big 3 and 2 powers and two grounds. we hope to pull a 155 out of it with all of that and some deadning and we are possibly buying a termlab to help test.

Doubling up on the big 3 is a waste of time.

Why you ask? Think about it. Maximum output for (most) alternators is 300 amps. It can't make any more current than that. 1/0 can handle 300 amps without issues, especially for a short run such as for the Big 3.

Use that wire for something else. Perhaps some additional frame grounds in the front and back. That would be more beneficial.

 

[Notloud00 10+ year member]

thanks for the info. yea it has a TON of potential //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif