15" XXX Can it be ported with this spec and still sound good..

what amp(s) are you using?
I would be using the MB Quarts.

MB Quart Reference RAA1000

1000 watts RMS x 1 at 1 ohm

if that is not enough I will push it with a Orion 2500d a modded 1501d mtx.

I plan to upgrade to bigger amp anyways. The MB is temp amp. //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

 
I would be using the MB Quarts.MB Quart Reference RAA1000

1000 watts RMS x 1 at 1 ohm

if that is not enough I will push it with a Orion 2500d a modded 1501d mtx.

I plan to upgrade to bigger amp anyways. The MB is temp amp. //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif
with a 1000 odd watts, it might be a bit small...different story if you ran a 2500d..

 
with a 1000 odd watts, it might be a bit small...different story if you ran a 2500d..
yea the plan is to upgrade to 2500d. so I want a box that will be able to handle the amp later on..I don't wanna get another box. //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 
What do you guys think about a 3cf (after port/sub disp.) with 3 4" aero ports tuned to about 32-34? I think he can fit that... I've done similar with very good results with an SX... just wondering what you guys think...

 
I remeasured the inside of the car!!!

now I have 16h 19.5D 33.5 Length //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

is that better getting close to spec.

 
comes out to 4.833^3'
you have more than enough room now

hit me up on aim: singhtronics

I wanna talk some more before I put in the order of the box. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

thanks for the help in advance!!!!

 
I have decided to go with Power Acoustik A3000DB after I sell the MB Quarts amp later on the line.

2300 Watts RMS Into A 1 Ohm Load.

while keeping the gain down. also tuning would be 30-32 hz.

 
a better question is whether he will be able to get the box throughthe trunk opening...

it will fit my other setup with to ID MAX were the same length.

so it will fit!! //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif

 
it will fit my other setup with to ID MAX were the same length.so it will fit!! //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif

i missed in your sig that youve got a hatch... 'cause i cant fit

fvcking 4^3s through the bulkhead of my accords trunk...

 
i missed in your sig that youve got a hatch... 'cause i cant fitfvcking 4^3s through the bulkhead of my accords trunk...

oo IC. my hatch is pretty big. I can make it bigger but I want it under the cover so at night I can cover it. //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

should be pretty loud once I am down with the setup.. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
oo IC. my hatch is pretty big. I can make it bigger but I want it under the cover so at night I can cover it. //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif
should be pretty loud once I am down with the setup.. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

definately man... good luck... i wish i couldve fit the XXX ported... but oh well...

that sub was heavy as hell!!!

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

bossman032

10+ year member
CarAudio.com Elite
Thread starter
bossman032
Joined
Location
killa cali
Start date
Participants
Who Replied
Replies
55
Views
1,883
Last reply date
Last reply from
bossman032
IMG_20260506_140749.jpg

74eldiablo

    May 22, 2026
  • 0
  • 0
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top