I built this enclosure on July 1st, and put it in my trunk, and what do ya know, it was 2" too deep for my trunk, so I gotta sell it. It is not carpeted yet, but will be upon request. I also have a terminal cup I can instal, but I will instal that as well upon request. You can choose either light grey, dark grey, or jet black carpet, or if you prefer an uncarpeted box, let me know. The terminal cup will be installed with a hole saw and sealed up with silicon, or if you don't want it, let me know.
Box Specs:
Single Ported Enclosure
External Dimensions: 38.25" x 16" x 16"
Internal Dimensions: 35.25" x 14.5" x 14.5" (the sides were inset .75 inches because of my carpeting technique)
Hole Diameter: 14.00"
Volume: 3.5 Cubic Feet
Tuning Frequency: 38Hz
Driver Displacment Taken into account: .2 Cubes
Port Area: [W = 4"] [H = 14.5"] [A = 58in^2]
Length of Vent: 22.5"
Box Specs:
Single Ported Enclosure
External Dimensions: 38.25" x 16" x 16"
Internal Dimensions: 35.25" x 14.5" x 14.5" (the sides were inset .75 inches because of my carpeting technique)
Hole Diameter: 14.00"
Volume: 3.5 Cubic Feet
Tuning Frequency: 38Hz
Driver Displacment Taken into account: .2 Cubes
Port Area: [W = 4"] [H = 14.5"] [A = 58in^2]
Length of Vent: 22.5"
