I have a 15" MT that made really bad slapping noise at higher frequencies 45hz and up. It makes no noise at lower frequencies 30hz and below. I glued some carpet where the tinsel leads hit the cone and it helped a lot, but I'm not sure if that fixed it completely because I don't have an amp to power it other than my home stereo sony amp which puts out 100 watts and it doesn't make any noise after I glued the carpet to the cone where the tinsels hit it. I did take the dust cap off fairly easily and re-glued it with 5 minute epoxy because I was told it could be the that the dust cap was not sealed all the way. It has glue all over the dust cap. Don't know if it still makes that noise or not so I am just selling it as a motor and 15" basket. Doesn't have gasket. Might work fine I don't know. It was reconed by a guy who claimed he's reconed over 30 MT's. $180 + shipping Still for sale
feel free to call me on my cell (512) 296-4324
right now it is dual 0.7 vc.
feel free to call me on my cell (512) 296-4324
right now it is dual 0.7 vc.
