Sold 10" Fi BL Dual 2 Ohm- FRESHLY RECONED

[Joseph K 10+ year member]

I am selling my 10" D2 Fi BL. I had it in an underseat ported box with around 900 watts going to it daily. I fried one of the tinsel leads about 3 months ago, and sent it off to Fi. They reconed it with the integrated leads, so that can't happen again. So pretty much, this is a brand new 10" BL, it's not really even broken in yet. I haven't really been playing it too much the last few months. I'm switching to two 12"s sealed.

I would rate it 10/10 on appearance and 10/10 on performance. These are awesome, BEEFY subs.

Specs:

DUAL 1 | DUAL 2

Fs: 37.1 Hz | 37.1 Hz

Re: 0.7 Ohms/coil | 1.4 Ohms/coil

Qms: 4.62 | 4.62

Qes: .23 | .23

Qts: .22 | .22

Mms: 191g | 191g

Cms: 0.96mm/N | 0.96mm/N

Sd: 310cm^2 | 310cm^2

Vas: 13.0 l | 13.0 l

Spl: 86.2dB 1W/1m | 86.2dB 1W/1m

Bl: 16.6 N/A | 22.7 N/A

Xmax: 18mm | 18mm

Rms: 1000W * | 1000W *

Sealed box: N/A cuft | N/A cuft

Ported box: .7-1.5cuft | .7-1.5cuft

Sub OD: 11.000” | 11.000”

Cut ID: 9.250” | 9.250”

Mounting depth: 6.250” | 6.250”

Displacement: 0.16cuft | 0.16cuft

https://ssl.perfora.net/www.ficaraudio.com/sess/utn;jsessionid=154bbe1697830f5/shopdata/0050_Speakers/0020_BL/product_overview.shopscript

Asking $225 plus shipping. Not really sure on that price, so feel free to make offers. I don't know what these are going for slightly used... Will have pictures up later. I have lots of refs on this site as well if anyone needs them. Thanks!

Click to read more...

 

[RetroAudioinc 5,000+ posts]

Photos of it? Interested as I run a single 10" now would not mind trying it out.

 

[Joseph K 10+ year member]

Cool man. I'll go take some pictures with my phone. I don't have a camera here at school with me. They'll just be of it in the box, I can get some of the entire sub sometime tomorrow when I go home.

 

[Digital Designs 10+ year member]

Could this thing take 1500 RMS daily or is that pushing it too much?

 

[hilodaze 10+ year member]

Could this thing take 1500 RMS daily or is that pushing it too much?

definitely can take the power. my friend ran 2 saz-1500.1 to one 12. LOUD for a single 12.

 

[Joseph K 10+ year member]

Could this thing take 1500 RMS daily or is that pushing it too much?

Yes, it can handle that easy. These subs are freakin BEEFY... it weighs a good bit more than the 15" Q I used to have. I usually ran it around 900 watts, kept the gains down. The JBL GTO can put out more like around 1400 RMS I've read, they're underrated. I've ran it before with gains all the way up, never had any problems whatsoever. Since the recone, though, I've only had about 900 or 1000rms going to it. Pictures in a second...

 

[Joseph K 10+ year member]

Terrible pictures (iphone)... go figure. They can do anything in the world, yet they have to flash for their camera lol. Can see a little white stuff around the edges of the dust cap in that second picture (that's what she said?). But no, that's just a reflection from some excess black glue that I accidentally got on the cap. It didn't have enough glue on it after the recone and was coming off, so they sent me some to fix it.

 

[Joseph K 10+ year member]

daylight picture...

 

[blazeplacid 10+ year member]

possibly selling some subs this weekend.....if you still have the sub in a few days ill take it

but if you find a buyer sell it, im not gonna do that dibs crap

 

[Joseph K 10+ year member]

possibly selling some subs this weekend.....if you still have the sub in a few days ill take it
but if you find a buyer sell it, im not gonna do that dibs crap

Cool man. Just hit me up! I may still have it, not too many have contacted me yet. Of course I've only had this up since last night lol.

 

[Joseph K 10+ year member]

 

[Joseph K 10+ year member]

bump

 

[Joseph K 10+ year member]

bump

 

[Joseph K 10+ year member]

seriously no one wants this?

 

[Joseph K 10+ year member]

Bumppp