10" dp

[lincolntc690 10+ year member]

is there any 10" baskets that will bolt to a dp motor? are the holes in the way to drill it out to fit a 12 spoke or any other 10" basket? looking to turn a 15" dp into a 10" for an 03 deville rear deck (has factory 10")ported thru the armrest install

Click to read more...

 

[lincolntc690 10+ year member]

^^^

 

[lincolntc690 10+ year member]

does the lethal injection 10 use the same bolt pattern as the dp's?

 

[massiveaudiocw 10+ year member]

Contact Nick @ IA, im sure he can help you out with your question. If the bolt pattern is not the same, you can always drill and tap new holes.

 

[lincolntc690 10+ year member]

i wondered if the old holes would be in the way of the new ones in any way, and its posted in their forum, figured ca might be quicker

 

[Korn4Life 5,000+ posts]

A 10" 12 spoke or 4 spoke will and should mount right up to a IA DP motor... Im almost 100% sure it uses the standard 6 bolt pattern

 

[lincolntc690 10+ year member]

i think they have a 5 bolt iirc

 

[IA2 10+ year member]

It depends on how old the motor is. The first batch was not tapped for the 12/4 spoke baskets. The newest ones are, however, and should bolt up fine. On the other hand, our basket has a different bolt pattern than the 12/4 spokes and will not fit 99% of other motors.