Recent content by Willydk

It worked... THANK YOU, I am amazed, and I had no clue that Remote wire requires 12v o_O I thought it only needs very little voltage.

I don't have 12v on my REM terminal, it has ~5.6V (took it from tail light bulb, that is on whenever ignition is on). And B+ is 12.3V when engine is off. Amp does turn on ;(

So hopefully my last thread about this Long story short: Tested my amp indoors, tested speaker indoors - works perfectly fine. When I power it up in my car, using exactly the same setup as indoors(phone rca) it powers up but does not output speaker voltage. I'm 100% sure that it's...

Okay, I narrowed it down to power cables. I tested my amp in the car using phone RCAs. It actually plays a lot louder if I just touch speak wires to phones RCA than through my amp... I'm using around 1 meter of this cable for ground and positive. According to crutchfield table it should be...

Thanks guys. Well I thought there must be something with power wires, so I changed the positions. For ground I used bolt on car chasis in upper trunk part(I saw youtube video where a guy used that place) carefully sanded the area before connecting. Positive wire was close to the main clamp, on a...

Well I'm totally lost. I brought my amp back home, and tested it using car charger, phone RCAs and a speaker. IT WORKED That means there's a problem in my wiring. I will try to describe how I wired everything. (picture isn't mine, just to show where I connect them ) Positive wire - directly...

Well when I got it powered up, and my RCAs done I started experimenting. Different settings, channels etc. I tried bridged connection, as well as left and right channel. I will take some pictures tomorrow of settings I tried, voltages and installation. Also I will take my amp home, and I will...

Hey guys, so in my last thread http://www.caraudio.com/forums/wiring-electrical-installation-help/614091-how-test-if-line-out-works-everything-seems-fine-but-speakers-doesnt-work.html adulbrich and keep_hope_alive helped me to get things moving, and by now, I think i might know where the...

Thanks for the help guys, I used 60hz test track. Sadly, my line-out does not work. I'm guessing that I will have to use High Level Speaker Signal to Low Level RCA Adapter Okay, I installed the adapter, and I was getting 3V, 5V on loud volume. But the bass speaker volume is very low even...

Thanks! I wil test them out and post if my head unit output is not functioning (little off-topic - i loved your build log themes - amazing job!)

Thanks! And will this track do the trick? And is that setting on my multimeter is correct?

I actually tried both. And I started mixing them up when I lost all the hope I was playing a regular song I was hoping to see some numbers at least. I will download the test track. Thanks!

Thanks a lot for your fast answer!! Just to be sure, I made a visual, is that correct?

Hello. I will try to be as detailed as possible. I own bmw E46, i have replaced my stock NAVI radio unit with this Android radio 7" Car Stereo DVD GPS for BMW 3 Series E46 M3 318 320 325 330 DVB T TV Camera | eBay I plugged my RCAs using radio's LINE OUT R and LINE OUT L into my amp that...