Recent content by trisr

  1. T

    Pioneer ts-w306c subs

    What about in comparison to the Kicker CVR 12" and the MTX T5512-04? I'm trying to decide between these 3....pioneer, kicker, or the mtx. thx
  2. T

    Pioneer ts-w306c subs

    What's the general opinion on this subwoofer? All-new design features more excursion capability with an efficient, punchy sound. 1000W Maximum Power 400W Nominal Power Efficiency: 83dB/W (1M) Frequency response: 18-500Hz Composite IMPP Cone w/Aramid Fiber Cone Reinforcement Arcs and...
  3. T

    Kicker CVR 12 or MTX T5512-44

    I'll be giving the sub 300 watts rms. Anyone else have an opinion which would be a better choice? thx
  4. T

    Fosgate p4004 or MTX TC6004

    Specs: Number of Channels 4 Rated Power 50 W x 4 @ 4 Ohms RMS 100 W x 4 @ 2 Ohms RMS 200 W x 2 @ 4 Ohms bridged RMS Total Power 400 Watts Bridgeable Yes Crossover Controls High-Pass (HP): 40-400Hz 12dB/octave Butterworth Low-Pass (LP): 40-400Hz 12dB/octave Butterworth Tone Controls...
  5. T

    Matching Lanzar Vibe431 with components and coaxials

    SPECS 4 x 150 Watts RMS at 4 Ohms 4 x 300 Watts Max at 4 Ohms 2 x 600 Watts Max at 4 Ohms Bridged 4 x 250 Watts at 2 Ohms RMS MOSFET Automatically Switches to Maintain Rated Power Over a Wide Range of Battery Voltages Stiffly Regulated PWM-Type Power Supplies Variable Input Level Controls...
  6. T

    Two options: MTX + Bravox, or Lanzar + MTX

    I agree that mtx + mtx is better. However, I made these combinations according to price. The Mtx amp + 1 Bravox sub is about the same price as the Lanzar amp + 2 Mtx subs. So, between these two combinations, what would you chose?
  7. T

    1 mtx amp, two components, and one 12" sub

    This is what I was thinking: Components Bravox: 60 watts RMS 140 watts Max MTX or Kicker sub: MTX sub: 300rms Kicker sub: 400rms MTX amp: 75 Watts RMS x 4 channels at 4 Ohms = 1% THD+N 150 Watts RMS x 4 channels at 2 Ohms = 1% THD+N 300 Watts RMS x 2 channels bridged at 4 Ohms...
  8. T

    Bravox components - cs60d, or cs60k?

    Bravox cs60k: Specs: Size: 6,5" Z: 4 ohms SPL: 90 dB/m/2.83v Power (max/nom): 160/80 watts Fo (Hz): 60 SD (m²): 0,0133 Qes: 0.70 Qts: 0.60 Vas (liters): 18 Xmax 3 Bravox cs60d: Specs: Size: 6,5" Z: 4 ohms Freq. response: 50-22 kHz SPL: 89 dB/m/2.83v Power (max/nom): 140/70...
  9. T

    Kicker CVR 12 or MTX T5512-44

    MTX sub: Specs: 12" Subwoofer Subwoofer Impedance Dual 4 Ω Frequency Response 30 - 150Hz RMS Power (Watts) 300 Rec. RMS Amplifier Power (Watts) 150 - 300 Voice Coil 1.75" Magnet Weight (oz.) 70 Mounting Depth 6-11/16" Cut Out Diameter 11-1/16" Sealed Enclosure Net Volume 1.25ft3...
  10. T

    Two options: MTX + Bravox, or Lanzar + MTX

    okay, so I forgot to ask......which would be a better choice? =) I am an american living in brazil, so my choices are limited. Most of the well-known brands are not sold here. The two combinations above will cost me in the neighborhood of $600 each. thx
  11. T

    Two options: MTX + Bravox, or Lanzar + MTX

    I am planning to run this: Specs: 4 x 150 Watts RMS at 4 Ohms 4 x 300 Watts Max at 4 Ohms 2 x 600 Watts Max at 4 Ohms Bridged 4 x 250 Watts at 2 Ohms RMS MOSFET Automatically Switches to Maintain Rated Power Over a Wide Range of Battery Voltages Stiffly Regulated PWM-Type Power Supplies...
  12. T

    Help me decide....

    If no one knows anything about the Bravox sub, ok. But, what about an opinion on the MTX sub? I have never used mtx subs before....I have only used their amps. thx
  13. T

    Help me decide....

    1.) Subwoofer Impedance Dual 4 Ω 4 Ω Frequency Response 30 - 150Hz 29 - 150Hz RMS Power (Watts) 300 300 Rec. RMS Amplifier Power (Watts) 150 - 300 150 - 300 Voice Coil 1.75" 1.75" Magnet Weight (oz.) 70 70 Mounting Depth 6-11/16" 6-11/16" Cut Out Diameter 11-1/16" 11-1/16" Sealed Enclosure...
Top