Recent content by SteamHammer

I'm a (small) quantum dealer and that amp will do 900w, the 1800w rating is "dynamic" which is the same as a max rating. Quantum Audio is a solid budget lineup, especially their cozmik line.

The MA Amp will eat tons of current, especially if you will run it lower impedences (1ohm or .5 ohms) If it doesn't get a good solid voltage source it will go poof. A High Output Alternator would be a good idea to go along with it if you plan on running it hard.

Same buildhouse.. could be but that doesn't mean squat. Build houses can make crap and highend right next to each other, depends on the specs of the product they are building. But Clif and audiobahn do NOT have the same parent company. Clif is owned by Anaba and Audiobahn is it's own...

The can get loud, dont sound very good, not that efficient.

Ummm lets try that again.... Their amps are rated at 13.5v unless stated otherwise. That means they ahve amps rated at 14.4v and 13.5. Go to their website, look at all the amps. If you dont see a voltage listed, it's 13.5v. If you see a voltage.. it's not 13.5v, it is whatever is listed. I...

From talking to Erik Harbour at Anaba, Clif is aimed at the SQ market and MA is aimed at the Get Loud Market. Clif amps are CEA rated which is a good thing. Visonik is the average line and not built to the same quality as MA or Clif.

I've installed quite a few and run the H2K-TP. They are built well and I put them in the midifi level. Their amps are rated at 13.5v unless stated otherwise.

Not a bad amp, especially at that price. The i series amps from MA are their entry level line so there stripped as far as features. But for that price it's a steal. Much better than a Boss or Legacy at that price range.

SQL box for a 12" XXX is tuned to 28hz per RE's site.

MA Audio H2k-TP Tripath Amp. 450x2@4ohm, 850x2@2ohm

200 for both isn't bad if they are in good condition.

The Gothic series from PA is a solid budget amp. However you wont be running the PA amps mono into your subs. The subs are dual 4ohm which yields a 2ohm or 8ohm load. The PA amp wont go below 4ohms mono. 8ohms would only give you 250-300w per sub. One of theose amps would push about 250...

You can run as many as you want as long as you dont exceed it's imdepdence ratings. It is 1ohm stable mono or .5ohm stable stereo. Your kickers are dual 2ohm subs so I'd run it stereo and wire each sub to 1ohm. That would lay over 1k watts per sub assuming you have the elictical system to...

DLS MS6. I replaced my CDT CL-61s and the MS6s are much smoother all around. Great tweater, revealing yet neutral. Mids are great too.

That MA amp is a high current amp which means you will need to be able to feed it plenty of juice or it wont put out it's rated power and if undervolted enough, it could die. If you can feed it juice it is rated at 13.8v so it should wang really good. It's not a bad price either. I've...