Recent content by slaggster

amps 650 1000

So I have a Zapco Reference 1000 2ch (black AG1000) I have 2 Image Dynamics 15's 1800w/rms. Ive had the 1 amp running both. I want to run 1 amp to each sub. Do I buy another Zapco? or Do I buy 1 amp that will run both subs at 1000+ watts? If a different amp what one? Any suggestions

So I had a simalar problem in my 2000 escalade. My light wouldn't flash with my alarm (Crime Stopper) I'm pretty sure the light switch is the same in the Yukon and Escalade. I took my light switch out and the wire from the alarm was melted at the switch. I replaced the wire and it's worked just...

cougar

1967 XR7 COUGAR

2000 escaleade

I've had the alt checked and it checks out good. My plan is to buy a new alt 200+ amps there is 1 on ebay they claim 250 amps 145 at idle. As far as the gains go on the amp they are turned all the way down maybe on 1/8turn. I only use the epic 160 for a volt meter an db level. I don't like the...

2000 escalade 140amp alt. yellow top under the hood,hc2400 in the back,and the big 3 is done. All power wire is 1/0 gauge. I had the ground to the frame in the rear and I spoke with sombody from Kinetic and he told me to run my ground from the battery up front to the battery in the back. So...

I need a box designed for me I'll build it. 3.0cuft tuned @ 32hz 15" idspl 1800w/rms no more than 24.5" wide 17" tall It's going in an escalade so plenty of room on the depth Also do I have woofer and port facing back or woofer up port back whats the best way which way is everyone else...

I have 2 IDSPL15's and have had them in a sealed box now I would like to build a ported box but am unsure how to tune it. Image Dynamics told me 3.0 cuft tuned at 32htz each. I have an Escalade that these will be going in. I would also like to build 2 seperate boxes in case i have to take them...