Recent content by Reedtech

Thanks I'll try that, I ran the power separate from the audio cables already. is it possible the static was introduced when i connected my harness chassis and earth ground to my HU's chassis ground on the frame?

when I adjust from my HU the position of the sound right and left control the actual front and rear and visa versa. Also i get some low static, not sure what to set the the amps mode on for each channel, there is FULL/HPF/LPF for channels 1-2 and 3-4. I need help figuring the easy way to fix...

Ok I fixed it, It was NOT the ground from behind the HU and Harness, although I did go ahead and hook it up properly anyway. I went to the ground on the amp itself and disconnected it from the seat bolt and touched it to a bolt on the door. The speakers started working instantly. From this...

Ok, I changed all the fuses, read up on the harness and hu manuals and am connecting the HU and Harness Chassis ground to the same spot on the frame and I am splicing the harnesses amplifier ground to the same spot. Will be back with results.

Yeah, the RCA's are straight. But the ground isn't, I did not wire an earth ground, just the HU's chassis ground to the frame metal.

Edit:Fixed! Had a bad ground for the 950.4 amp, changed its location from the seat bolt to frame itself. I'm a novice at this and have taken a planned approach at wiring and installing the HU and Amp's properly. I used butt connecters, high end speaker wire, kicker 8 awg for power and ground on...