Recent content by Qbenjamin

Greatly appreciated, off to Lowes!

Thx for quick response! Yes, .5" MDF, 35hz, single baffle and 3" PVC port. Height and Depth are locked at 6.5" & 13.5." Its being built for an Alpine Type S 10D4

Hey @shredder1, I'm finally getting around to building the box and realized the depth is off by 1.5." Can you confirm that if I do 6.5 (H), 30.5 (W), & 13.5 (D), that I'm not impacting the build in a negative manner given the previous specs? Additionally, what length does the port need to be...

No, I don't have an equalizer. I started looking at building this, but I would prefer to have my slot port, not a fan of the PVC tube. Does it completely change things if I use two 1.5" pipes? Seems like the 3" pipes are rare in my area.

Does it matter where the port is positioned on the right wall? Also, I noticed the depth/width is reversed in the sketchup, is that an issue?

Thanks for this and yes, I'm using 1/2" MDF since the Alpine is very light. I've never done a box with a round port, so this will definitely be something new for me.

The cut sheet shows the right vertical port wall is only 4.25" in depth, so that won't work since the driver needs at least 4.5". This is why I moved the sub over to the left (-5 offset).

I probably put something in the calculator incorrectly..?

I just used what Alpine provided from the spec sheets, but maybe I listed something incorrectly? Vent area: 10"^; vent displacement 0.17^

It's going under the seats of my truck, max height is 7.25", depth is ~15".

Need some assistance from the pros; I've done plenty of boxes in the past but never the actual design. I'm using the subbox pro website to create a small ported box for my R1T. As I'm designing...

Due to the amount of time and effort, I'd rather spend 95% of my time researching and the other 5% creating the enclosure. Hoping to get this right on the first try, it's not something I enjoy doing to begin with (building enclosures).

Need some assistance from the pros; I've done plenty of boxes in the past but never the actual design. I'm using the subbox pro website to create a small ported box for my R1T. As I'm designing the box, I'm trying to make sure this will work, as the negative offset of the sub has me questioning...