Recent content by OlogyAudio

Alpine using XBL^2? News to me.

http://www.madisound.com/catalog/product_info.php?cPath=45_229_250&products_id=633 http://www.madisound.com/catalog/product_info.php?cPath=45_229_250&products_id=1767 Depending on the xover point if you are looking for a good value in accurate drivers one of these could be the...

Ultimately depth is the restriction keeping the xmax down to 7mm on the 2/4 ohm units down from 12mm on the 8 ohm. The cone profile is a little on the deep side and the basket is quite substantial. I could see about sandwiching the motor up inside of the basket a few mm and I can look into a...

Oops. I was a little unclear. By 10hz lower I meant a 10hz lower f3 IB, anechoic. The xmax is going to be 7mm for both the 2 ohm and 4 ohm units simply due to depth restrictions. The 4 ohm is excursion limited under about 95hz the 2 ohm is excursion limited under about 97hz Both units on...

Honestly even the RS 7" is a hard match with a large format tweeter, nonetheless a small format... It wants a minimum of 2200hz but a 1800hz xover is best... The 8" is even rougher. The AA poly should mate well though at a bit of a higher freq.

That is simply how the basket came from factory, however I'm thinking of countersinking the screw holes a bit more just for cosmetics... It won't matter much in car audio I guess but for home audio it will have an impact. I was thinking along the lines of having the multi- vehicle screw hole...

What about if a .75" spacer is provided if it was 3" to start with? Any input on the screw holes? Thanks I'm still around it's just been a bit hectic and Matt is out of the picture.

The 2 ohm design I have is a little more sensitive. The 4 ohm design I have is about 1dB/w less sensitive but has about 10hz more extension IB and a little more of a peak when in a small sealed kick. There’s a 2nd higher sensitivity 4 ohm design that’s suited very well for home audio :-D but...

Would you rather have a 2 ohm or 4 ohm component set, everything else equal? Right now I'm working on 2 and 4 ohm versions of that unit with less mounting depth and I'm liking the 2 ohm version better myself but I can tailor the 4 ohm to perform similarly... Just a few cosmetics and minor...

What a busy year...

I've been busy losing my hair between school and trying to coordinate so much other stuff and keep quality perfect Being that I’m a student I have nothing other than time to devote to this. Seriously I think 6.5" midbass drivers are cursed... But this isn't the place for that. I have a...

I'm looking forward to seeing the new line and the new pricing By the way I still enjoy my ava 15 very much Chad and as some may know I am quite a stickler for great sound quality and amazing low bass response above all else.

I'm not biting anyone... More like TC sounds needs to know that someone is using their basket w/o licensing... They wouldn't be licensing it to them when only TC and Eclipse can use that frame as far as I can gather... If they are freely licensing that frame I'm sure they would have loved to...

Well something is off here... -- http://www.soundsolutionsaudio.com/forum/index.php?showtopic=6223&st=33 I say they are getting them from china illegally... Guess I should let TC sounds know... Patent litigation, fun

Sorry to go off topic here but quite frankly the tent sale is awesome... Check out what Wolf picked up this year: http://www.pesupport.com/cgi-bin/config.pl?read=291392 Not bad for $64 He picked up some revelators for dirt cheap last year and I picked up some nice cherry prefab cabinets...