Recent content by NY-KiD

Okay another problem, the two wires that I soldered, keep coming off when I blast the bass or hit a bad bump. Basically the metal pad that the wire goes on doesn't hold the wire very well. I soldered it 3 times already and still problem. Could I attach small copper wire from the coil to the...

I had to look at the whole board closely. Luckily it was pretty easy. Two wires from what looks like a coil were off. 350z is pretty bumpy so I guess they came off. Re-soldered it and wala! Everything back to normal Thanks for the help btw

Ground connection is good because i have 2 amps, 1 for speakers and 1 for sub, and the one for speakers works fine. I opened it up but have no idea where to look...everything seems to be fine

I just got jl audio w6 and 500/1 amp installed from best buy in my 350z. After a week sub stopped working. I connected sub to another amp it worked. The amp powers on all wiring is good when i hit a bump driving it starts working for a second or two and stops. I got it checked by bbuy they said...

So I was figured out how to get into the initial menu to select the rear channel settings and it was already set to FULL instead of subwoofer, so I'm concluding the hu is defective which sucks cuz the best buy warranty on it expired just two months ago lol

Theres no FIE in the menu anywhere. I wasnt aware theres an option for rear speakers...theres no power button on the hu though. Its avic n2 navigation unit. Only way to turn it off is by taking off the face plate.

Yes im only talking about rca connections. Amp is infinity 475a 4 channel Infinity - Car Audio

oh wow i didnt think about that lol. Just to clarify when you said "pass front channel to rear channel"...is that the same thing that i have done already? (take output from amp and connect it to rear channel input)

I actually tried using rca output on the speakers infiniti amp and connect it to the rear channel rca input, and the treble improved a little but still its very low compared to front channel. I'm going to try splitting the front rca and maybe itll be a little better, but I know everytime you...

Nope its not the subwoofer output. I connected the subwoofer rca to my speaker amp just to make sure and you get no sound cuz its for subwoofer. What setting in HU could it be? I mean I checked the fade levels, eq settings, etc. but theres no seperate options for rear channel and front channel...

Im sorry I forgot to mention I already checked the crossovers on the amp, both rear channel and front channel are set to HP and the same input level. When I connect rear channel rcas to front channel it has the same problem - low input, no treble. But its def not the cable. Is there anyway to...

I just got four new mb quart coaxials (DKH 116). Have them hooked up to an infiniti amp, pioneer avic N2 head unit. Here's the problem..the front speakers work perfect - good volume, high treble. The rear the speakers on the other hand lack volume and barely have any treble comming out of them...

I have 4 speakers running to a infinity 4 channel amp, but I'm only using two channels so I have the 4 speakers bridged. I'm using two crossovers for the 4 speakers. When I crank the volume too high the sound goes off (I think thats clipping) and resumes when I turn it down a little. When I...

Thanks for all the help. I'v concluded everything is fine its just the backpanel of my maxima that is messing up everything. It rattles so much. I dont even have gain turned half way, if I do more than half it rattles insanely. My buddy told me to take off the backpanel and put regular...

You probably are right about the box, but I had p3s in the same box before and they sounded pretty good and these subs are pretty much the same size, a little bigger. I have a sealed box I'll try them in that box tomorrow. Most people say ported box is better for these subs, although some say...