Recent content by northkcracer

Ok, I won't use boost. I don't really have the possibility of a new amp, unfortunately. :/ I'm running 2 12" 1300w Max sony xplods, and a 600w sony xplod amp with a scosche LOC (gain maxed out.) Assuming I absolutely must stick with the amp I have and I don't push my subs too hard (90% rock)...

In order to have a good level from my sealed subs for the rock I listen to, I have to crank the gain up to about 0.4V (cranked almost to the maximum 0.3V) if I don't have the low boost turned up any. Is this safe for the amp? I don't notice any distortion or anything. Would it be better to turn...

Not at all close to what I was needing to know.

Why is is that my line output converter has a Left and Right gain setting that both affect both subs. The closer the settings are to the same position, the less output I get. For example if I had both at a 7 O'Clock position I get no output. But when I have one at 6 oclock and one at 10 oclock...

These subs were my birthday present and I'd like to get the settings all good so I can stop messing with it. Setup (all that I know. I bought the amp and subs used.) LOC - My LOC is a metra adjustable LOC. It goes from 0V to 1.2V Amp - Sony Xplod 600w. It's an older model maybe. Subs - 2...