Recent content by miyagi

yeah the terminalls are --++ and i have the sub wired as per the amp manual. I was acutally able to get output from the sub...only problem is that i had to turn the gain almost all the way up, i'd say the gain is probably 80-90% i looked @ the manual for my h/u and I believe it's output...

the amp is installed correctly. i hooked up my old amp and was able to get output from the subwoofer. the power light comes on and the hifonics lettering illuminates, so i'm not sure what else could possibly be wrong except for it being defective :/

double post

just hooked up my old amp and sub and they both worked fine. only wires i touched were those connected to the 1210d (old sub didn't work w/ 1210d either)

double checked everything...even wired the capacitor back up and still nothing

bought a hifonics bxi 1210d amp and received it very fast. only problem is that i'm not getting anything from my sub with wires all hooked up properly

just got this amp in today brand new from sicaudio and was pretty hyped hooked it all up and went to try it out...nothing from the sub i'm using 4ga power & ground wire, rca's and remote wire are all hooked up properly, sub is wired in parallel for a 1ohm load, green power light is lit up...

yes the brutus

i went ahead and ordered the 1210d from ya, thanks for the advice

what kind of shipping time would i be looking at? i'd like to get it by sat if possible

Just picked up a 12" kicker L7 2ohm and realized my old jbl gto601.1 isn't enough for it. i'm pretty much clueless about a lot of the audio brands and was wondering if MA audio makes decent amps. I'm wanting to push at least 700w rms to my L7 but not really wanting to spend over $400. I'd just...