Recent content by Kschmitz91

Alright cool thank you.

I have been looking all over online and I can not find anything about how many watts this amp will push at 2 ohms. All I see is 1500w at one ohm. Can anybody help me out here? Thank you.

I currently have this sub in a 1.75 cu ft slot ported box with a jl 500/1 powering it. Can I make a bigger porter box for this sub and still have it sound right? And how should I have the box designed? It's in te back of my ford explorer so it's not in a trunk. Would the sub firing up and the...

I used 3/4" mdf since I couldn't find any local stores with 1". I have no braces installed. I used carpenters glue, 2" drywall screws, and used silicon caulk. I did not double layer anything. There are no air leaks besides the air flowing through the port. The tuning was off because I had...

Alright well I went ahead and built a box for my hdc3 15 with an aero port and the tuning did not sound right according to the psp port tuning tool. I designed the box to be 4.25 cu ft and I even went over my dimensions multiple times to ensure I had them right. I busted out my tape measure and...

That's what I thought, thank you.

I still haven't gotten around to actually making the box yet, but I have been looking into using an aero port for it. From what I have read it's easier to make and I like the fact that I can change the tuning of the box easier. I'm definitely going to be using a 2000w amp with it. Does anybody...

I bought it to fix and sell. I'm good with electronics and I wanted to see if I could fix this. Thanks anyways. But the only damage I see on the board is one capacitor and a few of the mosfets have little Knicks on them.

I did that and all of the mosfets look fine. I did see one of what I believe is to be a capacitor that looked blown. How do I take the boards completely out of the case?

I have looked everywhere online and I can not find a repair guide. I'm certain the mosfets are fried and need replaced. Are there any tutorials on how to do this? The amp is a v2. Thanks.

It's made of 3/4" mdf and the front is 1" thick. I found the Atrend 15lsv online shipped for 80. Ill probably just have one made but I thought I would ask since it's relatively cheap and it was recommended to me.

When I had 4 12's in my car it was a sealed box and it worked well. I just talked to the guy who I bought the hdc3 from and he told me to look into the Atrend 15Lsv box. It's 4.25cu ft tuned at 37. It's definitely cheaper than the quote I received from the guy to make one for me, has anyone...

Yeah that makes sense. I'm sure I will upgrade all of that eventually anyways. Could that sub really handle the 3500w? It looks to be very durable and well built. And thanks so much for all of your help so far I really appreciate it!

If I were to get more subs I would probably have 2 15's and just get a new box made. I have had a bunch of different subs these past few months and I always just sell it and take a loss in the process. I'm tired of doing that and want something that I will be content with for a while.

Alright cool thanks for the heads up. I just talked to some dude earlier today from Craigslist that makes custom boxes. Ill talk to him tomorrow. 4 cu at 32hrz is what I'll tell him. Should I be specific as to what style of port? I'm sure he would have an idea since he makes them but I just...