Recent content by Kiliam

I just bought a 1998 K1500 regular cab truck. I'm going to attempt to squeeze my cvx12 behind the 60/40 bench seat. I ran the following measurements through to RE enclosure calculator. Width 50 inches, height 18 inches, top depth 4.5 inches, bottom depth 9.5 inches. With 24.75 square inches of...

This wouldn't happen to be in a fugly dodge ram would it?

Cotjones... is that you?

My wife and I got our latest pit from a rescue after she was left for dead and attacked by an Akita. She had a very bad case of mange and was left partially blind in her left eye. Now one year and 30 pounds later she thinks she's a fifty pound lap dog. None of our friends have any qualms...

I'm in Plainville. I've never even bothered to go to one of those liquidation shows. Something irks me about paying for parking, then paying for admittance. Then once you get inside it's a sea of crap. You may find a deal here or there, but how much did you really save in the end?

It's at the CT Expo Center. Over by what used to be the meadows music center.

If I'm not mistaken that year still had a real Buick engine, not a bastard chevy smallblock in it. While the Buick motor is very capable, parts are harder to find.

It was a nasty low frequency hum that changed volume with the radio. As soon as I turned it on I knew what it was. I originally had it grounded to where the strap for the T-Top bag goes. Changed to the factory ground for the motor and it's been quiet ever since. If it helps I run a kenwood...

I had a similiar problem in my camaro, it's a 91. I ended up using the ground under the rear plastics for the hatch pull down motor. I just sanded the paint down and used a good ring terminal. Haven't had a hum in over a year now.

I've bought way too much stuff from Rich through the years. I live all of a mile and a half from his store. If he handles his online store like he does his brick and mortar you'll be just fine.