kanihoncho's latest activity

I do sincerely appreciate your feedback but I dislike bazookas . . .

Okay, I keep learning and keep asking questions. I am abandoning the replacement of the stock sub. Too many variables. I'm now considering a...

Not at all. Only the speaker's sensitivity is what counts in the front stage. 90dB and above is a good target.

What is a good sensitivity that I should I be looking for in a sub when my 4ch speakers have a sensitivity of 93 dB (at 2.83 V). Should I be...

I'm definitely thinking of quality RCAs and a proper length . . .

Just buy a knuconceptz kollossus 1/0 kit and add extra rcas. But to your answer no there isn't really alot of benifit in simple installs like...

Hi gang, total Newb here. What are the pros and cons of buying an amp power install kit vs buying the parts individually? And do I need to pay...

I recommend OFC all day long. You can even pull it later on and use it again if need be with little to No Corrosion. Run Power wire from battery...

I would go with the ofc. If you use the cca, you should go a size larger. ( If your amplifier requires 0 gauge, use 00 if you go cca. )

The amp I am considering requires a 0 gauge connection to the battery. I've installed several car stereo setups (only one with an amp connection...

One or two, they are still subwoofer outs and are mono summed signals from both left and right. Even the 2 RCA subwoofer pre-outs on the 2nd one...

Speaker ratings are generally a thermal/mechanical limitation of the drivers. Music is dynamic, not continuous. During quiet periods a song, you...

The second HU was used to show the two RCA connectors from the HU to the amp. The first HU where it is labeled <subwoofer preout> is only showing...

You have 2 different HU listed but they both have dedicated subwoofer outputs. Anytime you have the option to use a dedicated preamp output...

Okay I am seeing two possible ways to connect a sub with HU and amp depending on their construction (there maybe more but I'm a newb). I also have...

Some high power offerings and much appreciated. When buying an amp that offers much higher power than the speaker ratings, I assume that I will...

Here is another 5 ch to add to the mix. Ive installed quite a few sub amps 4chs and 2 chs, and they serve very well for the coin. I prefer a 4ch...

A 5 channel amp is fine. The front and rear speakers are the the same efficiency so at any given input, they will be the same volume, relatively...

Does this amp/speaker combo work well for both sets of speakers? If I buy this amp with the rear speaker specs in mind will the front speakers be...

Your 5 channel amp is 2 ohm stable on the primary 4 channels at 2 ohms if it lists that capability/spec, which it does. I assume you are running...

The impedance (resistive load) is built by design into the driver - physics.

Thanks again have a good weekend . . . .

That is correct. Thanks for making that clear. One last question . . .How does the amp know whether the speakers are 2, 3, or 4? Is it a setting...