Recent content by jt73

Yes I reset both.

Newbie and need advice bad. I have a kenwood x450-4 and my B side has correct voltage at gain = 20.0v, but my A side I set gain at 10.9v using Left terminals but right terminals are reading a little over 20.0v.I reset my headunit and also would appreciate advice on what I should do as far as...

bump

I have a kenwood excelon x-450. I was checking output voltage on A side for my front speakers while setting gain ... one side is at 10.9 volts but when I check opposite side it reads 20+ volts which is very close to B side which is set at 20 volts.... So my rears are at 20 and one front is 10.9...