Recent content by jstaguy24

I'm planning a port across the entire length of the bottom. 18" sub centered in box, 15" subs centered off each side.

That is exactly how I was planning it. Original box design plan was throwing me off due to the slot port. I think I'm going to redraw it and have the slot port at the bottom, so the top is not hindered by the port

I have been planning on 8 cubic feet, tuned around 30hz. Sub up, port Back. Also trying to figure out a design I can swap the subwoofer baffle and have 2 mounts. 1 for the fi 18, and 1 for my 2 Memphis lvs 15's (once I get one of them repaired) might end up with 2 boxes, but don't have a decent...

Going to start a build on my FI BL 18 pretty soon. Just pulled a dual 15 wall out of the expedition. Now deciding which route to go with the 18. 7-8 cube ported box? Or I have a guy that can design me a 6th order band pass for it. (Which he recommends) Just looking for opinions. Have only ever...

Just purchased a set of b&c 8pe21's. Guess I'm going pro audio. Time to start fabbing an enclosure

Bridged my amp to my components for 200 watts per side last night. It did better, if Listening to regular music they keep up fine. If I play bass enhanced music, the subs still drown them out. Listening to them without the subs, they seem extremely loud. But barely audible when the bass track...

Thinking of selling a pair of Memphis lvs 15's. How much should I ask for them? I see them on eBay for 750 but I'm trying to be realistic lol

I have 100 watts going to them. I can bridge to 200 watts. I know adding more speakers can cause issues, but I thought of putting the 5.25 gtis in the a pillars, and another set of 6.5 components in the doors.

Got the mojos in today along with both amps. Ran 2/0 wire from front to back, and added a second battery. Seemed to help my voltage tremendously. Think I will add another back battery and bigger alternator down the road. Going to have to step up my highs. Component speakers are being drowned out...

Just got the subwoofer wall and amps online tonight. Think I'm going to have to get away from my components . They are not keeping up with the bass unfortunately. Didn't want to go pro audio, but looking like its a necessity if I want to keep my sub setup as is.

I have the subs crossed at 120 hz. Box is tuned for 34 hz approximately. I have the gtis crossed at around 120 hz also. It actually blends well now. But I was going to increase my port size and tune a bit lower. If I do I'll sacrifice some top end on the subs. Right now I'm sacrificing some...

I have been running a set of jbl p660c components. I loved the sound, strong midbass, and ability to get loud without distorting to try and keep up with sub stage. I also have a set of jbl c508gtis. I switched back and forth and after some listening, the gtis are so much more detailed and still...

In my other box, I was running the mojos. I got a 146.3 on the meter, but couldn't get anymore Due to my amps going into protect for voltage drop. Have since started building the wall. Working on power upgrades as well. So haven't ran either in the new setup yet. Still in progress

Voltage gauge went in yesterday. I also have 2 Memphis lvs 15's. I can get more out of them at a lower gain setting. They don't need as much power to get moving. I have 2/0 wire to install and have 1 automotive battery for the back. Just have to run a ground for it now. I was going to buy a...

I have a c pillar wall almost installed now. It's a little over 12 cubic gross. With current port and sub displacement have a net of just over 10 cubic feet. I am probably going to a larger port, only have 88 sq inches of port area at the moment