Recent content by jamezruiz

thanks everyone! your input helped a ton!!

i bridged the amp as illustrated on the crutchfield diagram. my amp install kit came with one set of RCA and an AGU fuse of 80amp. the amp states Bridged 140RMS x2channel and Peak Power of 200wattsx 4 Channel. i wired two subs that are TS-w29c 4ohm and 120RMS. so i plugged the set of rca on...

what do you guys recomend for the amp thats pushing 900rms regulated at 1ohm with 8gauge power and ground wire with a 60amp fuse??? this dimming is rediculous:veryhapp:

everything seems fine but now my lights dimm allot, what kind of capacitor should i get for the 900rms 1800 watt kenwood amp??

can the settings on my head unit cause the amp to clip? cus the headunit have bass boost, loudness and etc settings

okay, so i went to a stereo shop today and asked for a bigger fuse, 40amp fuse is the highest for BUSS/ATC . so they gave me a fuse holder to replace the older one and a 60amp fuse, i still got the 8gauge power and ground wires. i was listening to the system and it cuts out at a certain volume...

better do it your self, you get experience and you save the money, I've been through that path

well anybody know if its possible to put in any of the ATC MAXI FUSES IN THE CURRENT 8GA. POWER WIRE/FUSE HOLDER?

yes , thats correct, a 40a fuse in the front and the amp have 2 X 30A , is that okay??

humm but which wire you think can be shorted?? the ones on the sub inside the box?? i havent changed the wireing of the coils, just the wires from the outer sealed box to the amp, yeah everytime i replace a fuse i put the same kind 40a. well the bass boost isnt high maybe half way , and the...

should i upgrade to 4 gage wire????

after i play a song, it blows in between songs, i blew 3 fuses in 15 minutes or so

no, the car was off, when i put and replaced the blown fuses'

WELL I DID WHAT U SAID AND THE AMP POWERS UP, BUT SINCE THE RCA AND SUBS WERE NOT HOOKED UP , NO SOUND CAME OUT FROM IT , BUT THEN I WENT AND HOOKED EVERYTHING UP AND IT BLEW 3 FUSES TOO, when i put in the fuse it made a spark sound NOT SURE WHAT I DID WRONG

its 8ga. power and ground 40a fuse