Recent content by Hawaiiboy808

I was running a test tone and put my DMM AND as soon as the test leads made contact to the speaker outputs it’s sparked and my amp switched into protect mode for 10 seconds thoughts? Is it safe?

Issue was solved turned down my sub level to 0 and tuned from there

I’m seeing 22-24 volts coming out and on a Toyota Corolla I’m on stock electrical only 0 gauge ground and power to amp but I’m reading 13.6vs for input

@Big Diego 27 im running zero gauge off of stock electrical @metalheadjoe yes I checked the output Using my dmm

I’m currently running a sundown SFB1000.1d and my amp will clip even tho I’m running half the watts it should be able to produce at 1ohm

I’m running a kenwood ddx276 subwoofer setting turned on Max could it be from my set up. I recently added a second amp for mids and instead of pulling out the hu I split the rca and put full range for my filters on the hu

I have a skar rp800.1d amp running off stock electrical at 14.24 volts dc at 40hz but without having bass boost on I’m reading pretty low in ac volts coming out of the speaker outputs. But with bass boost on and using ohms laws I’m showing around 800 watts to my sub at 1ohm. And I know bass...