Recent content by giltyler

It is on its way back to sundown now maybe they will tell me when it gets there. whatever it is sounds metallic but not ferrous

At 2 ohm it should do 1300 fairly efficient and that should be fine. The Fox Acoustic Dodge Ram box is already a little small to start with at 1.55 per side

I am Positive it is not in the coil or gap

There are a few tests at .5 online but I hoped someone here had hands on experience with doing it.

Nothing is in the vent or gap. This is under the spider and outside the coil from the sound it makes and is loose but not really floating around.

I bought a CAB 2k new in box off eBay and want to run it on 2 dual 2 ohm SA12 would .5 be to low or should I run at 2 ohm Ram 2500 Dual AGM under the hood 180 amp alternator bought a 2 year square trade warranty for it also

Have a 7 month old SA 12 Chrome back magnet with a non coil related rattle. Picking up the sub and shaking or just rotating it you can hear something metallic moving around. coil still looks new and cone moves full travel without and noise Ohms out 2.2 and 2.3 any ideas what Could be wrong

The Raptor smell is not bad at all I just refinished a Ranch Hand Headache Rack with it. Mead and Soundman both have videos of it in there projects. The others who stated DYI are right with a little effort carpet is easy to do just get some 3m or other good spray adhesive and some sharp razor...

Have you looked into using Raptor spray liner. You can get a small kit on Amazon with enough to do a box for $39.00 and $13.00 for the spray gun. You would need access to a compressor but that stuff is easy and looks great. You can find Lots of vids on YouTube on how it works

You probably need to create a FB profile and message him directly That is the way I got in contact with him and many other companies are doing contact that way now

What amp are you using

Will the Audison SRx4 run components for Front active or is this not enough power. Something like lower tier hertz or similar

This does it’s power and then some and would not have to be pushed as hard. https://www.skaraudio.com/products/rp-1500-1d

I thought the passive crossover wasted as high as 20-40% in power due to heat

In the past I always ran passive crossovers that came with the components and in the really old days caps and coils to do the filtering. Now I want to try Active and want to know what Power output I need since the network will not be wasting power. Will a small 4 channel Hertz or Audison be...