Recent content by Garbageman

I bought the General Motors Class II data bus interface , So this one little speaker dedicated for chimes does not have to go thru the old bose amp does it I can just unhook the hole thing. Just find what wires are for the chimes and run them to the speakers from the Interface.

So If I hook up Chan A , left and right the way im suppose to and then take chan B..pos to the left side legg and pos on the right side legg and take both neg from chan B and put them on the right side neg legg is considerd bridgeing to the other chan. So my best bet is takeing this amp in and...

Any idea what wires I need to use so i can keep my door chimes?..Do I need to run them thru my amps also or just hook them up straight to my speakers ?

yes I will be useing 2 amps, ( 140 watt 4 chan for my doors and a 100 watt 2 chan for my sub )

I have a 2007 chev trailblazer that I put a new H/U in with the interface and everything works, BUT now I will be getting rid of all the Bose speakers and putting in some after market speakers. I know there will have to be some rewireing so I can keep all my chimes. Has Anybody ever done this...

So with that being said will I be wasting my time and defeating my purpose if i hook up both neg to one leg of chan B. Will it be ok if I hook it up that way..(pos where they need to be and both neg on one leg for chan B) or should I go have this looked at ?

Did any of this make sence or do I have eveybody lost on what Im asking ?

I know I sound like an Idiot, but to make sure I understand you correctly.. my 4 chan amp wich will be powering my componets and mids needs to be set on HP, and my 2 chan wich will be powering my sub needs to be set on LP....right ?

yes littledane i already have the interface,and it is all hooked up but now that im adding a 4 chan i know that im going to have to rewire some things to keep my chimes. that someday soon will be my next post on how to do...lol

And WENN am I to understand these are the settings on my H/U correct ?....(I dont know how to put your comment in this reply other then copy and paste)

WOW...ur right murph..srry it is all over the place. I just wanted to make sure all the info was there.

curious.....did I do something wrong ? I see this post has many views but no one has commented.

Recently I bought a 4 channel amp off ebay, I hooked up one 3 way to right side of chan A..worked; hooked up same speaker to left side of chan A..worked; same speaker to left side of chan B..worked; hooked up same speaker to right side of chan B....didnt work unless I hooked up the neg to...

I have a 2007 chev trailblazer and This is going to be my first install of this nature so I need some help. My H/u is a Pioneer DEH-P8200r (45x4, with 3 pair of RCA preouts Front/Rear and Sub, 2way x-over HPF and LPF). I will be running a 4g wire from my Batt to a distribution block then to My...

would you be willing to sell just the x541 ?...if so how much ?.....and are these refurbished ?....