Recent content by FSUFAN

One more question how does one get more volts out of a cars electrical system? Like 12 to 14 and so on.

Can't not came sorry

I have heard good and bad with this amp and if it came safely push one sub with two batteries and a 300 amp alt then I don't know what's up cuz that's ridiculous. I got this amp brand new for a nice price so I couldn't pass on it. Remember I'm only going to be using half this amps power.

What fried the colossus wasn't lack of power, it was the fact that sometimes my sub would go below 1ohm briefly and that amp is **** sure not stable below that. He'll I don't think it was really stable at 1 to be honest. Anyway that's what the professionals have told me. Unfortunately...

Yeah I have a voltage meter in the trunk so I can keep eye on it. Yeah it won't be a 16v setup but thought since was only using half the amps power was considering adding one 3100 kinectic to the mix and I should be good. That 300 amp alt is plenty from what I have read, most ppl are running...

I would suggest a fosgate 1500d which which will put out exactly what you need and be real clean. Not inexpensive but worth the extra bucks.

Was wondering guys on how many batteries for this amp I have one 1200 kinectic already and the big 3 done with a 300 HO alt. I will be running a FI team 18 at 4k rms so obviously will be using about half the amps power. It seems overkill with this amp but planned on buying another team 18 in...

Well the amp was running fine in my other car and I have 50 dollar brand new rcas so I wouldn't guess either of those. My best guess was a ground up front with the big three but please correct me if I'm wrong.

Ok, so my problem is I have serious engine noise coming through rear speakers even with head unit off which is a first for me. I talked to the guys who did the install and they had no clue, that I was pretty much screwed but I find that hard to believe. Anyway, anyone have same problems or...

I had a shop install everything but I'm concerned about the port demensions, 6 cubic ft box tuned to 30 hz... does anyone know what the size of the port should be by chance?

So just an update, installed a 300 amp alt and got the big 3 done. Did 6 cubic ft on the box and tuned it to 30 hz. Pounds like no tomorrow but still want to get the Sundown saz 5000d on the FI team 18. I'm loving it!! Oh and put alpine type r components and memphis mojo bullet tweeters...

Well I have a brutus 2000 on my L7s and there is no change in my electrical so figured adding a battery I should be ok. I have seriously thought about a 220 output alt just to be safe, I just want to know ifi will be alright till then.

Well I know the 3200 isn't hitting the rms the sub deserves but figured it was still going to hit pretty hard, it's still 3k of power. I do want to look into a bigger amp but was just on kinda of a budget. My stock alt is 130 amps and I bought a 1200 Wat kinetic and of course going with 0...

No replies at all? I figured with the knowledge on this forum someone would have some answers for me!

Couple of questions, I was wondering what hertz to tune my fi team 18 at and is 7 cubic foot box a good size? My other question is I bought a colossus 3200 to push this woofer and will that be enough to make it hit pretty hard?