Recent content by Farkel

An older Alpine amp I bought a pair of PAC SNI-1 ground loop isolators and plugged them into my Headunit's preamps to see if that would help... it didn't do anything. The whine is still there. The whine also gets proportionately louder when the car is on and you rev it

I'm having a problem with noise coming out of my speakers when the head unit isn't even playing music. I'll describe the symptoms as best I can to hopefully isolate and narrow down the possible issue?  1.) With the ignition in ACC mode, no music playing, there is a faint static/white noise type...

From the other thread, I need to find a single DIN deck that has a small reverse camera capable screen in it, no flip outs, etc. due to the compact interior. And the JVC deck is the only one that fits the bill

Yeah I plan on just ripping the old IMPRINT and Alpine deck out altogether. The problem still remains on how best to connect 3 RCAs into a new JVC deck that only supports 1 RCA channel... and this is the only deck I can buy. Is there like... an RCA joiner or something?  Pic of said Exige 😎

Thanks for the info unfortunately the only HU I can go with that has a reverse camera screen on it and is a true Single DIN is the JVC I was talking about with its 1 Preout.. I feel like this is a balancing act now. Is there another elegant way to deal with getting my 3 preouts down to one...

I am looking to change out and update my current Alpine headunit (circa 2010) with a more modern JVC headunit. After digging through my current system and wiring, I noticed that my amplifier's 3 pairs of RCA cables (front, rear, and subwoofer) are all tied into this Alpine "PXA-H100 IMPRINT"...

Thanks, so the connection type for rear view cameras hasn't changed much in the past 5-7 years?  What Single DIN head units are out there nowawadays that support a screen and you can recommend?  Also the car is a Lotus Exige S :)

So the sound system that was installed in my car is a bit dated now but still sounds great, however, I do want to upgrade at least the headunit and keep the rest of the components in place... including the speakers, amp, and the rear view camera.  The headunit currently in place is an older...

So I think I might ditch the car's 2 rear speakers and just use the fronts only. My question is, what should I do about its wiring regarding the wiring harness? I have a Metra wiring harness for my headunit, can I simply not connect the meta harness's rear speaker wires to anything, and just...

I did a search but didn't come up with anything on here. Just wondering how people recommend this, say compared to the p4100? I'm basically looking for a nice double din touch screen, no need for navigation... I was looking at the spec sheets and the AVX820 looks like it has a lot of amp and...

Let me know if you have one in very good condition and perfect running order! Looking for either of these 2 double DIN head units you can also email me: eric@turborush.com thanks

Looking for either of these 2, must be in very good condition and perfect running order! Let me know what you have You can also email me: eric@turborush.com Thanks

Probably around 6.5" or so, and if I'm only going to get components I don't mind them being a little higher end

I'd like to do a more subtle approach to my sound system on my new car... On my last car I changed everything out and did a subwoofer box, etc. etc. This time, I'm mainly looking to keep things more low key... just an Amp, Headunit, and Components. My question is about the component speakers...

Thanks for the help how will I go about bridging 2 amps together? Can you do that with 2 different amps? Also, instead of buying a new amp all together, do you think it's safe if I run my current set up in parallel and drop the ohms to 2?