Recent content by droopdog7

Thanks. My sub has a high level inputs, so I believe I should be able to connect the wires directly. Does this make the most sense or would an loc be better? Would low signals be passed to the aftermarket sub either way?

I have a Hyundai Kona with a factory sub in the trunk area. It’s okay, but I want to install my Audison Prima APBX 10 AS2. It’s a powered sub that I was using on my last car. I had an aftermarket HU with rca outs and no factory sub, so connecting was easy. Now I have a factory head unit with...

Yeah, I think I saw the manual say load in the corner and point to the front so I just went by the book. Either way, plenty of bass for my taste. Thanks again.

Thanks for all the help guys. Got up up this morning and gave it a shot. Ended up tying all blue wires and seems to have worked. Excuse the mess but here is a pic.

The instructions say to remove the auto turn on loop if using the remote wire. Are you and Espinoza talking about that as far as bypass? And can I confirm that I don’t need the metra antenna wire connected at all because otherwise I bought that part for nothing.

You’re saying that the bazookas might turn off at low volumes at low volumes if all five spliced together? And I’m not sure what you mean by the bypass line? And would you connect the blue white from Sony and blue from metra antenna and blue from bazooka and tape off the two wires from pac?

Thanks. Why do I have the urge to just tape all five wires together? Is that *******? Anyway will give this a shot tomorrow. I don’t have a retractable antenna but, the metra 40 antenna adapter was part of the required package so it must be doing something? I assumed it was needed so the...

I SO want this to be the right answer. At this time the four blue and blue white wires are connected together so when you say clip, are you saying cut off the copper so they aren’t really connected (like if I just taped each one off individually)? And this includes the blue wire from the metro...

Thanks. You lost me after the first sentence =P

Thanks. This is the PAC unit I used just in case: https://pdf.crutchfieldonline.com/ImageBank/v20201202090700/Manuals/541/541RP4TY11.PDF The pic of sony harness is below:

Thanks. Haven’t tried anything yet. I’m a novice so trying to understand as much as possible before starting. Looked up the fuse box option and looks like I would need a piggy back adapter, which maybe I can grab from an auto part store. The only thing the videos I saw didn’t show is what...

In both cases the remaining three wires stay together? FYI, my head unit has a blue white but no blue wire. And, I do have a factory amp if that matter.

I’m not 100% sure but the diagram did not show a blue wire from Sony. So probably did not have one. So what does that mean for me again?

When I installed my after market HU (using a PAC harness), the directions had me connecting 4 blue and blue/white wires together (see image below). The 2 blue wires appear to relate to the antenna and the two blue/white wires to the amp turn on. So now that I want to install the sub, I have...

Apologies for not coming back to this post but had some family issues. I’ve done a little more research on connecting the sub and wiring kits and it looks like I’ll need to connect the rca cables (with Y connector), the ground cable, the power cable to batter (with fuse), and the remote on...