Recent content by DangerCDV

Not for your specific vehicle recently, but I would need all the measurements to do it properly, so if you got someone else I understand. Glad your going that route. And not doing some way to small prefab box. Remember tho, it's better to get enough airspace and have a sealed box, than not...

I design custom enclosures. Just hit me with a PM and I got you. I make every design completely custom based on sub, vehicle, musical preference, goals and everything else. If you want to get 100% from those subs, I'm your guy. It's alot more than just airspace and a tuning frequency.

Any of these in the proper enclosure is going to be nice. Get a custom box (I design if your interested) and throw two Dcons, or a 12 inch Gcon in there. Or Sundown SA12.

My stock 2000 mustang with the Mach460 pushes a 1700rms amp without problems. Im sure the 2010 can handle more, try and run it and see you have any voltage drop before throwing any money into the electrical.

okay, well im simply asking if upgrading to a sundown SA-12 (the step up form the Sundown E series) Or similar subwoofer would give me more bass output. I do not want to mess with the gains any more on my current set up, everything sounds fine, I would just like MORE bass output. Cant wait...

The gains are set fine. I can turn the speakers up to more than good enough for listening levels before the subwoofers give out. I just want more bass. I just wanted to know if replacing the 400rms subs to something around 600+rms each would help me get more bang from my 1700rms from the...

No, the sub sounds clean, and hits the low notes much better than my old 10s. But PLEASE, dont suggest a different box. this one is custom and fits perfectly in my extremely tiny trunk, so the box is final! The sound is fine tho, I just cant give it hardly any of my available power. as for the...

current box: SEALED, .9 cubic feet per chamber. (subs reverse mounted, yes its small but its all I can fit) Current amp: Hifonics 1700.1 (gain set very low) current subs: Sundown E-12s (400rms version) My question: Should I upgrade to a subwoofer that can handle the power better? Like the...

Thread moved.

Question... uh, What impedance were they running at? If this new one is 1 ohm, was the other one 4 ohm?

Truee! its all good now, thanks.

lol, gotcha

lol, ok, il go with the top one. is that bottom one also 1 ohm? I didnt know there was more than 1 way to do it.

okay, so I checked the manual, and the reason for the 2 + and the 2 - is to make wiring multiple subs "easier" I just got confused, but the +s and -s go to the same place. So, which one of these is better? or are they the same?

okay, thank you!