Recent content by clemson27

I cant decide on whether or not I want to do 2 12" american bass xfls, or 1 sundown x10. I have an audiopipe apmi 2k. I want punchy bass yet I also want some lows. This will be in a 2011 cruze.

How would that affect my issue though? My voltage is fine, like i said it'll play the deep low bass, just having issues with the high bass.

Not sure what you mean but when its cold out, sub is stiff, amp is happy, it'll do it a lot. When its hot out and i've been playing it awhile, it doesn't happen as often.

No idea, it's the factory radio so wherever they have it grounded

Here is where my grounds are for big 3 - https://ibb.co/euWXyv https://ibb.co/mkFZdv

I bought it at 50k, Ive put around 20k on it since ive owned it.

The ground is really tight and bare metal. Also, if it were a bad ground, wouldn't it just kill the amp rather the radio? I can upload images of my big 3 if that will help.

This might not be the exact place to ask, but I am lost. I have a 2011 Chevy Cruze Ls 1.8l Auto. Great car, I've put around 20k miles on it already and only had to change out a cam sensor, besides regular maintenance. Right when I bought the car I installed a sound system (my hobby). I've...

Currently have a Sundown X-15 v1 dual 2 ohm in a 4 cu ft box tuned to 32hz powered by an Audiopipe Apmi 2k wired at 1ohm. My question is where should I set the Subsonic filter, and the Low pass filter at? Also, I have an oscilloscope to tune the amp, but Im not sure exactly how to tune it since...

It's going in a 2011 Chevy Cruze. Its the v1

So I ordered a Sundown X-15. Ported box spec says 4.2 cu ft I believe. I have two boxes but not sure which to use and don't wanna take the time to find out lol. Im only gonna be pushing the X-15 on 1300rms when it can handle alot more. Box 1: Ported (Recessed) Sub Enclosure Box for a 15"...

I have stock radio so I use a Rockford Line driver. My question is how do I tune it? I know how to tune the amp with an oscilloscope, but if the line driver is turned up too high wouldn't it affect how the amp is tuned? The line driver has a light to show clipping but some songs clip some don't...

So I have a DC Level 3 15in sub in a 4 cu ft. box tuned to 32hz. My question is where should I set the low pass filter at? I believe the subsonic needs to be around 24. Any help would be appreciated. Also, that sub could handle 1000 watts clean power right?

For a DC Level 3 15in it recommends 3 cubic ft for a ported box. My question is should I get a box that is 3 cubic ft tuned to 35 or get a box that is 4 cubic ft tuned to 32?

I have two american bass vfl 8's powered by an audiopipe apmi 2k. They're in a ported box tuned to 41hz. Where exactly should I set the subsonic at?