Recent content by CampNowhere

So I figured out what the actual problem was. The purple set of wires had to be inverted. All of my other wires went white to white, gray to gray etc.... for some reason the lurolenset of wires to to be connected purple to purple black, not purple to purple. I have no idea why, but after I did...

I know the connections are good, I checked everything and there aren't any wires accidentally touching. I mean there are only 8 wires for the speakers and the ones I am having issues with is the purple & purple/black. I did hook up my stock head unit just to see what would happen, the...

I installed a new radio and wasn't getting any sound at all. I disconnected all wires and stared hooking them up one by one and found out that my rear passenger speaker wasn't working. So I left the 3 other speakers connected and have audio. I figured it was the speaker so I replaced the speaker...

Update: I figured out what the problem was, all the wires were correct, I had a blown speaker. My backseat passenger speaker was blown and once I disconnected that wire from the harness I got sound. Although now I have to get a new speaker. I am unsure if the speaker was always not working or if...

I have a 2010 F150 XLT and I installed a Kenwood DDX9703S with idatalink ADS-MRR with a idatalink FO1 harness. My Kenwood has been updated to firmware version 2.6.0008.0600. Here is a link to the wiring diagram I used for my connections, my vehicle starts on page 58...